Sip firmware Release 1 for ip phone 1140e administration

56
Configure the provisioning server
Downloadable WAV files
It is possible to customize the ringtones on the IP Phone E with
SIP Firmware. Up to five special ringtones can be downloaded from the provisioning server and stored on the IP Phone E. The end user can select which ringtone they would like to implement.
In order to download these special files, the files must reside on the provisioning server and be specified in the SIP provisioning file. For more information, see "Download the SIP Firmware to the provisioning server"
(page 26)
. The WAV files have a maximum size of 512 KB each for the IP
Phone 1140E.
The file format is restricted to ITU-T A-law or u-law (8.0 kHz, bit, mono or 16.0 kHz, 16 bit mono).
After the WAV files are downloaded to the IP Phone E, the WAV filenames appear in Pref, Audio, Tones, Ring Pattern(1 to 8 are standard ringtones, and 9 and above are WAV ringtones) and the WAV ringtones can then be selected to replace the standard ring tones.
For further information about downloadable WAV files, seethe SIP Firmware
Release 1.1 for IP Phone E User Guide (NN43113-101).
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

57
Configure the DHCP server
Use DHCP to provide partial Device Settings or full Device Settings, as well as to automatically provide Voice VLAN IDs.
Table 7
Characteristics of Partial DHCP mode and Full DHCP mode
Partial DHCP mode
Partial DHCP mode retrieves the following network parameters from the DHCP server IP address, subnet mask, and default gateway configuration for the IP
Phone 1140E.
Full DHCP mode
As well as those parameters retrieved in Partial DHCP
mode, Full DHCP also retrieves the following from the
DHCP server DNS server and Provisioning Server.
Auto VLAN Discovery
Auto VLAN Discovery retrieves the Voice VLAN ID for the IP Phone E with SIP Firmware.

Download 1.47 Mb.

Share with your friends: