Sip firmware Release 1 for ip phone 1140e administration

•PACKET_LOSS_ENABLE YES | NO

Download 1.47 Mb.

View original pdf

Page	32/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 28 29 30 31 32 33 34 35 ... 76

NN43113-300 02.05 1140E Adm

•
PACKET_LOSS_ENABLE YES | NO is a command that enables or disables packet loss detection. Packet loss is the fraction of RTP data packets from the source lost since the beginning of reception. The value is an integer scaled by 256. The range is 0 to 25600.
— YES - enables packet loss detection NO - disables packet loss detection
•
PACKET_LOSS_WARN xx is the threshold to report a warning on
Packet Loss. The default is 256 (1%).
— xx - a value between 1 and 25600.
•
PACKET_LOSS_EXCE xx is the threshold to report a warning on unacceptable Packet Loss. The default is 1280 (5%).
— xx - a value between 1 and 25600.
•
JITTER_ENABLE YES | NO is used to enable or disable inter-arrival
Jitter detection on incoming RTP packets inter-arrival time. The value is represented in 1/65536 of a second YES - enables jitter detection NO - disables jitter detection
•
JITTER_WARN xx is the threshold to report a warning on Inter-arrival
Jitter. The default isms xx - any integer value that is 1/65536 of a second.
•
JITTER_EXCE xx is the threshold to report unacceptable Inter-arrival
Jitter. The default isms xx - any integer value that is 1/65536 of a second.
•
DELAY_ENABLE YES | NO is used to enable or disable Excessive
Delay detection. This is the one-way delay (including system delay) for the call, measured in milliseconds YES - enables Excessive delay detection NO - disables Excessive delay detection.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

50
Configure the provisioning server
•
DELAY_WARN xx is the threshold to give warning on Excessive
Delay. The default isms xx - any integer value that is 1/65536 of a second.

Download 1.47 Mb.

Share with your friends:

1 ... 28 29 30 31 32 33 34 35 ... 76