64
Physically install the IP Phone 1140E
6
Install the Ethernet cable connecting the PC to the IP Phone 1140E
(optional). If connecting PC Ethernet through the IP Phone 1140E,
connect one end of the PC Ethernet cable to the IP Phone 1140E
using the RJ-45 connector and thread it through the channel.
Connect the other end to the LAN connector on the back of the PC.
7
Install additional cables. If applicable, plugin optional USB devices.
Connect the Ethernet cable to the LAN Ethernet connection. If using an AC power adapter, plug the adapter into an AC outlet.
8
Wall-mount the IP Phone E (optional. The IP Phone 1140E
can be mounted either by (method A) using the mounting holes on the bottom of the IP Phone E stand, or (method Busing a traditional-style wall-mount box with RJ-45 connector and 15-cm
(6-inch) RJ-45 cord (not provided).
9
Replace the stand cover. Ensure that all cables are neatly routed and press the stand cover into place until a click is heard.
10
Put the IP Phone E in the wall-mount position (optional. If the
IP Phone E is to be mounted on the wall, put it in the wall-mount position by holding the tilt lever and pressing the IP Phone 1140E
towards the base until the IP Phone E is parallel with the base.
Release the tilt lever and continue to push the IP Phone 1140E
towards the base until an audible click is heard. Ensure the IP Phone
1140E is securely locked in position.
—End—
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks
Physically install the IP Phone 1140E
65
The following figure shows the connections on the IP Phone 1140E.
Figure 11
IP Phone E connections
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks
66
Physically install the IP Phone 1140E
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks
|
