Sip firmware Release 1 for ip phone 1140e administration

VLAN FilterConfigure the VLAN Filter (not available if Voice VLAN is set to No).Table 17

Download 1.47 Mb.

View original pdf

Page	53/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 49 50 51 52 53 54 55 56 ... 76

NN43113-300 02.05 1140E Adm

Disable PC Port

VLAN Filter
Configure the VLAN Filter (not available if Voice VLAN is set to No).
Table 17
VLAN Filter
VLAN Filter Setting
Result
Enabled (box is checked)
Traffic is forwarded to the IP Phone E port,
based on a review of the MAC address of the packet as well as the q tag value. Traffic is forwarded through the IP Phone E port,
(to the network stack of the telephone, only if the packet matches the MAC address of the IP
Phone E and contains the Voice VLAN tag.
If the Automatic VLAN Discovery feature is used,
the filter is adjusted dynamically as the IP Phone
1140E validates the VLAN suggested by DHCP.
Disabled
The VLAN filter is disabled by default. If the
VLAN filter is disabled, traffic is forwarded to the
IP Phone E port based only on a review of the MAC address of the packet. The IP Phone
1140E accepts traffic addressed to the MAC
address of the IP Phone E as well as any broadcast or multicast packets from any VLAN.
Disable PC Port
With a disabled PC Port, the IP Phone E with SIP Firmware does not receive or send packets to or from the PC port. No device can use the
PC port to connect to the network.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

86
Device Settings on the IP Phone E with SIP Firmware
Data VLAN
Configure the Data VLAN (the VLAN applicable to the PC port. The behavior of the PC port is summarized in the following table.
Table 18
PC Port (incoming traffic from PC)
Data VLAN
Result
No
All traffic received on the PC port is forwarded based on the MAC address. The packets are not modified in anyway (Note that the value 4095 is not a valid
VLAN ID. This is intentional to ensure a proper
VLAN ID is entered.)
All untagged packets received from the PC have an q header appended and the VLAN ID
is set to the value that is manually provisioned in this field. Any packet arriving on the PC port that is already tagged with matching VLAN ID is forwarded as is. Packets tagged with different
VLAN IDs are dropped.

Download 1.47 Mb.

Share with your friends:

1 ... 49 50 51 52 53 54 55 56 ... 76