Sip firmware Release 1 for ip phone 1140e administration

Download 1.47 Mb.

View original pdf

Page	7/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 2 3 4 5 6 7 8 9 10 ... 76

NN43113-300 02.05 1140E Adm

Figure 1 IP Phone E with SIP Firmware Related documentation

16
Overview
•
provision the Device Settings parameters on the IP Phone E with
SIP Firmware
Note: Converting the firmware on an IP Phone E from UNIStim
Firmware to SIP Firmware overwrites the UNIStim Firmware. The IP Phone
1140E cannot operate in both modes simultaneously. A switch from UNIStim to SIP Firmware or SIP to UNIStim Firmware requires a firmware reload.
The following figure shows the main components of the IP Phone 1140E
with SIP Firmware.
Figure 1
IP Phone E with SIP Firmware
Related documentation
The SIP Firmware Release 1.1 for IP Phone E User Guide
(NN43113-101) tells the end user how to use the IP Phone E, including how to:
•
use the Context-sensitive soft keys and Navigation key cluster
•
enter text
•
use the address book
•
access and use the call inbox and call outbox
•
configure and use instant messaging
•
receive, identify, answer, redirect, decline, or ignore an incoming call
•
operate hold, three-way calling, call transfer, and call park
•
use other features such as speed dial, call forward, do not disturb, and setting up conference calls
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Introduction
17
•
configure Bluetooth headset operation (IP Phone E only)
Note: All features are not available with all call servers.
The IP Phone E Getting Started Card included in the box with the IP
Phone E also contains useful information and explains how to:
•
connect the AC power adapter
•
control the volume when answering a call
•
make a callusing the handset
•
make a call with the headset or using handsfree

Download 1.47 Mb.

Share with your friends:

1 2 3 4 5 6 7 8 9 10 ... 76