Sip firmware Release 1 for ip phone 1140e administration

Download 1.47 Mb.

View original pdf

Page	46/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 42 43 44 45 46 47 48 49 ... 76

NN43113-300 02.05 1140E Adm

Phone E Release 0625C23
7. Place the selected firmware in the correct directory on the provisioning server.
4
In the IP Phone E Network Configuration menu, change the
TFTP server address and enter the correct TFTP server address.
This can be the provisioning server as defined in the chapter "Configure the provisioning server" (page 25)
5
Select the Apply&Reset Context-sensitive soft key to save the settings and reset the IP Phone 1140E.
The IP Phone E downloads the firmware file. The display shows [FW] reading
…
If the download is successful, the display shows [FW] writing
…
and the blue LED flashes.
After the firmware image is downloaded to the IP Phone E, the display shows [FW] finished..., the blue LED stops flashing, and the
IP Phone E resets.
The IP Phone E registers to the TPS with the new firmware version.
If the upgrade is unsuccessful, seethe chapter "Maintenance and troubleshooting" (page in the section Download failures.
—End—
Follow the next procedure to download the minimum required version of
UNIStim Firmware automatically through TFTP on bootup.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

74
Upgrade and convert the IP Phone E firmware
Procedure 10
Downloading UNIStim Firmware automatically through TFTP on bootup
Step
Action
1
Press the Globe/Services key on the IP Phone E twice quickly.
If the admin password prompt appears, enter the password
26567*738
The Local Tools menu appears:
Table 13
Local Tools menu
1. Preferences. Local Diagnostics. Device Settings. Lock Menu
2
Select 3. Device Settings from the Local Tools menu.
The Device Settings screen appears.

Download 1.47 Mb.

Share with your friends:

1 ... 42 43 44 45 46 47 48 49 ... 76