This step-by-step guide leads you through the process of activation and configuration of the Wildix system


Assign analog ports of FXS to users



Download 9.64 Mb.
Page26/43
Date05.05.2018
Size9.64 Mb.
#48211
1   ...   22   23   24   25   26   27   28   29   ...   43

7.3 Assign analog ports of FXS to users


Before proceeding with assigning analog ports of FXS gateways make sure to:

  1. Connect the gateways to power supply (for non-PoE models)

  2. Connect the gateways to Wildix Switch

  3. Connect analog phones to the gateways

  4. Provision the gateways



DOCUMENTATION:


  • FXS quick installaton guides: https://manuals.wildix.com/#voip


In addition to FXS media gateways which allow you to connect analog devices, Wildix offers an FXO gateway (W04FXO), allowing you to connect analog lines, or to integrate a Wildix VoIP PBX into an existing analog system infrastructure:

  • FXO whitepaper: http://www.wildix.com/wp-content/uploads/downloads/2015/07/fxo-whitepaper.pdf

(available also in It / Fr at https://manuals.wildix.com/#voip)


  • Difference between FXS and FXO - Blog post: https://blog.wildix.com/en/the-difference-between-fxo-and-fxs/

7.3.1 Assign W01FXS


W01FXS gateways are assigned via WMS, procedure is the same as for WP4X0:
Go to WMS > Devices

  1. Select the provisioned gateway

Note: “loginX” is displayed in Phonecolumn




  1. Click “Assign to user”

  2. Select the user from the list and click “Save”


NOTE:

  • In Devices menu the value in the “Phone” column changes from “loginX” to user extension number

  • In Users menu, by focusing the mouse on the corresponding user status, it is possible to see that there an FXS gateway registered to this account.


7.3.2 Assign ports of W04/24FXS


Go to WMS > Devices
Note: after you have provisioned the gateway, it’s possible to select the Default Tone for your country:


  1. Select your device(s)

  2. Click “Edit Device”

  3. “Default Tone”: select your country and press “Save”


Go to WMS > Devices > Analog ports


The provisioned FXS gateway is displayed in the table:



  1. Double-click on the gateway

  2. Assign analog ports to the users and click “Save”



Assigned ports are displayed in the table:


PART 8: W-AIR DECT solution
8.1 Introduction

8.2. Create a W-AIR network

8.3. Configuration and login of W-AIR handsets




Download 9.64 Mb.

Share with your friends:
1   ...   22   23   24   25   26   27   28   29   ...   43




The database is protected by copyright ©ininet.org 2024
send message

    Main page