3g wiFi Mobile Power/Router Quick Install Manual



Download 30.33 Kb.
Date02.01.2017
Size30.33 Kb.
#7066
3G WiFi Mobile Power/Router

Quick Install Manual

It is a consumer electronic 3G network product, different functional in one: 3G route, wireless route, ADSL dial-up Internet connection, wireless network storage and mobile power, makes you enjoy the wireless surfing and share the wonderful contents in your digital devices anytime and anywhere. Including functions as follows:

*3G route: support the 3G wireless network card dial and bandwidth sharing of WCDMA/CDMA 2000/TD-SCDMA systems.

*Wireless route: support the traditional wired broadband network ADSL dial, dynamic network and static network access.

*Wireless network storage: support U disk, USB HDD file reading and sharing, and online movie on demand.

*Mobile power: can charge iPhone, iPad, Android cellphones, tablets and other mobile digital devices.

Wireless relay: realize the relay and amplification of signals in order to expand the cover range of the wireless network.


  1. Accessories list

1. Host

2. USB cable

3. User manual/Warranty card

4. Qualification




  1. Panel introduction


Hardware Port

Function Description

Power switch



Boot, can boot the router.

Charge, boot mobile power function, can charge external devices through the USB port.

Power off, close this router.

Power indicator button

Display the current battery power, the power indicator is divided into four levels.

USB port

Can connect the 3G USB network card of WCDMA / CDMA 2000 / TD-SCDMA systems, U disk, USB HDD, or can charge Android cellphones, tablets, PSP and so on.

DC charge port

DC 5V input, this device can be charged through the Micro USB cable.

Charge indicator

While charging this device, the indicator keeps on.

RJ45 Ethernet port

WAN port: under Dynamic IP/Static IP/PPPoE modes, this port is used as WAN port to connect the hotel wired network, LAN broadband, xDSL Modem/Cable Modem.

Restore factory setting

Long press 5 seconds this key and the release when the route is on, the router will restore factory setting.



2.2 Status Indicator Description


Operation

Indicator status

Description

Boot

Blue light always on

Push the switch to “On”, it means normal boot when the blue light always on.

Insert mobile storage device

Blue light slow flashing (1.5s once)

Insert the U disk, HDD into the USB port, after 8-10s, if blue light slow flashing, ot means mobile storage device normal loading.

Blue light always on

Fail to load.

Insert 3G card



Blue light fast flashing(0.5s once)

Wait for 39s, if Blue light fast flashing(0.5s once), it means entering into 3G dial status.

Blue light slow flashing (1.5s once)

Blue light slow flashing (1.5s once), it means successful 3G dial, can visit Internet..

Blue light always on

Unsuccessful dial.

Insert ADSL network cable



Green light always on

After 5s, if green light always on, it means normal network cable connection.

Blue light slow flashing (1.5s once)

A while after the green light always on, if blue light slow flashing, it means successful ADSL dial, can visit the Internet.

Insert router network cable (under Dynamic IP mode)

Green light always on

Normal network cable connection.

Green light slow flashing (1.5s once)

Normal network cable connection, and means that the router successfully gain the dynamic IP address from last router.

Insert router network cable (under Static IP mode)

Green light always on

Normal network cable connection.


  1. Application Scenarios

It supports the following application modes:

1). 3G-to-WiFi sharing surfing mode.

2). Wired-to-WiFi sharing surfing mode.


  1. Mobile power function: description of charging cellphones, tablets and other digital devices.

First step: Battery power display:

  1. Press the power indicator button, the battery power indicator will be on, then can see the current power percentage, the light will be off after 4s in order to save the power.

  2. The corresponding relation of battery power and power indicator:





Indicator status

Description

Battery power indicator



All lights off

No power, please charge this device

1 light on

Less than 25% power

2 lights on

25% to 50% power

3 lights on

50% to 75% power

4 lights on

75% to full power

Second step: charge cellphones, tablets and other digital devices.

Push the switch to Charge Function gear(C gear) can boot moble power function, insert the charge cable of the digital product into its USB port, then can charge iPad, iPhone, Android smart cellphones and other mobile digital devices.

Prompt: it is better to use the cellphone original charge cable, so can realize the best charge effect.




  1. Charge itself:

When its battery is being out of power, it can be charged through the following ways.

*Power charge: connect one port of the Micro USB cable to its DC charge port (Micro USB port), the other port connects to the adapter’s USB port.

*PC USB charge: connect one port of the Micro USB cable to its 5 DC charge port (Micro USB port), the other port connects to the PC USB port to charge this device.

Charge Attentions:

1. Better to use the charge adapter of 5V output (600 to 1000mA output current), including the common iPhone, iPad charge adapter.

2. Charge time: 5V 1000mA charge plug: about 5-8 hours; 5V 600mA charge plug: about 11 hours; Direct charging through PC USB: over 12 hours.

3. During charging, must not use this device to charge other devices in order to protect the battery and extend its use life.


  1. Functions and Configuration of 3G WiFi wireless router

It supports visiting and configuring through web browser mode, we can use the common Microsoft IE browser, iPhone Safari browser and the built-in browser of Android system to log onto the router, to view the content of the mobile storage device, configure the parameter of the router.
6.1 Wireless client devices first need to connect wireless router (take iPad as an example)

Step1: open the iPad main interface, choose “Setup”→”WLAN”, to enter WiFi setup interface, open the wireless switch, iPad will automatically scan the surrounding wireless network, we can find router of “3G WiFi xxx” SSID name, double click to connect.

Step2: During connection, input the WiFi password on the back of the router shell to make connection (the password can be altered).

Step3: see and set the network parameters, click the “>” button right on the connected wireless signal, it will pop up the wireless connection network parameter setup interface. (DHCP server opening by default, it is better to use DHCP.)


6.2 Enter the configuration interface of 3G WiFi router

Click Safari browser, input “http://192.168.169.1” on the address bar, click Go, then can enter the interface of the router.

Besides, aiming at the users of iPhone, iPad and other ios devices, we can directly input “wd” on the address bar and then click Go.
6.3 Change the WiFi password

The factory setting WiFi password is rather simple, remember to change the WiFi password during first use in order to ensure the data safety.

Changing method:

Click the WiFi Safety icon to enter WiFi safety setup interface.


6.4 Set up the 3G surfing parameter

After inserting the 3G wireless network card into the router’s USB port, it will automatically carry out 3G dial surfing.

Click “3G” icon to enter 3G configuration interface, choose the model of 3G network card, in the dial setting, choose boot dial mode, input the dial parameter provided by 3G ISP, click OK, auto recognition mode by default, plug and play, needs no modification.
6.5 Set up the wired broadband surfing parameter

Under wired WiFi mode, it is used as a wireless router, the Ethernet port as WAN port, all wireless terminals can only connect to the router through WiFi to surf Internet.

Click “Network setting” - “WAN”, choose the surfing mode according to the front end broadband, supports 3 common wired surfing modes: static IP, dynamic IP, PPPoE.


  1. Static IP

If the access mode is static IP that the network provider gives, you needs to input ISP or ask the administrator to give you a IP address, subnet mask, gateway, DNS server, backup DNS server.

  1. Dynamic IP

If the access mode is dynamic IP that the network provider gives, then you needs no setting, click OK, Static IP is the common surfing mode of hotels.

C. PPPoE


If your surfing mode is “ADSL PPPOE” mode, just needs to input the account information that the ISP provides you on the “User name” and “Password”, click OK.

D. Wireless relay

If you want to use Wireless relay mode, just choose “wan wifi modes”, click “scan all AP”, then choose the wireless Ethernet port you want to relay, input password and click OK.
6.6 Basic setting of WiFi wireless network

Click the left menu, “Wireless network setting’ - “Basic setting”, you can have wireless network settings of network mode, SSID, wireless channel and other basic settings.




  1. Wireless network storage function: the iPad terminal devices how to visit U disk and HDD?

It provides a USB port, U disk or HDD card reader to have connection, supports sharing and visiting of the storage devices’ content in wireless way. Take ios platform as an example, can use the third-party stream media software to play, upload, download the sharing files of the USB storage, such as Goodplayer, OPlayerHD, TIOD and Aceplayer.

Step1: insert U disk, HDD and other USB storage devices into the USB port of the router.

Step2: open the switch of the router to check its blue LED status indicator light.

Step3: open the iPad’s WiFi setting, choose SSID of the 3G WiFi device to have wireless network connection.



Step4: click Safari browser, input “http://192.168.169.1” or “wd” on the address bar, click Go, then click Multimedia viewing icon, can enter the router’s mobile storage file browsing interface, you can quickly visit the pictures, videos, music and other files in the U disk or the HDD.

Download 30.33 Kb.

Share with your friends:




The database is protected by copyright ©ininet.org 2024
send message

    Main page