3g wiFi Mobile Power/Router Quick Install Manual
Download 30.33 Kb.
|
- Navigate this page:
- Accessories list 1. Host 2. USB cable 3. User manual/Warranty card 4. Qualification Panel introduction
- 2.2 Status Indicator Description
- Mobile power function: description of charging cellphones, tablets and other digital devices.
- Functions and Configuration of 3G WiFi wireless router
- 6.1 Wireless client devices first need to connect wireless router (take iPad as an example)
- 6.2 Enter the configuration interface of 3G WiFi router
- 6.3 Change the WiFi password
- 6.5 Set up the wired broadband surfing parameter
- 6.6 Basic setting of WiFi wireless network
| 3G WiFi Mobile Power/Router
Quick Install Manual It is a consumer electronic 3G network product, different functional in one: 3G route, wireless route, ADSL dial-up Internet connection, wireless network storage and mobile power, makes you enjoy the wireless surfing and share the wonderful contents in your digital devices anytime and anywhere. Including functions as follows: *3G route: support the 3G wireless network card dial and bandwidth sharing of WCDMA/CDMA 2000/TD-SCDMA systems. *Wireless route: support the traditional wired broadband network ADSL dial, dynamic network and static network access. *Wireless network storage: support U disk, USB HDD file reading and sharing, and online movie on demand. *Mobile power: can charge iPhone, iPad, Android cellphones, tablets and other mobile digital devices. Wireless relay: realize the relay and amplification of signals in order to expand the cover range of the wireless network.
1. Host 2. USB cable 3. User manual/Warranty card 4. Qualification
2.2 Status Indicator Description
It supports the following application modes: 1). 3G-to-WiFi sharing surfing mode. 2). Wired-to-WiFi sharing surfing mode.
First step: Battery power display:
Second step: charge cellphones, tablets and other digital devices. Push the switch to Charge Function gear(C gear) can boot moble power function, insert the charge cable of the digital product into its USB port, then can charge iPad, iPhone, Android smart cellphones and other mobile digital devices. Prompt: it is better to use the cellphone original charge cable, so can realize the best charge effect.
When its battery is being out of power, it can be charged through the following ways. *Power charge: connect one port of the Micro USB cable to its DC charge port (Micro USB port), the other port connects to the adapter’s USB port. *PC USB charge: connect one port of the Micro USB cable to its 5 DC charge port (Micro USB port), the other port connects to the PC USB port to charge this device. Charge Attentions: 1. Better to use the charge adapter of 5V output (600 to 1000mA output current), including the common iPhone, iPad charge adapter. 2. Charge time: 5V 1000mA charge plug: about 5-8 hours; 5V 600mA charge plug: about 11 hours; Direct charging through PC USB: over 12 hours. 3. During charging, must not use this device to charge other devices in order to protect the battery and extend its use life.
It supports visiting and configuring through web browser mode, we can use the common Microsoft IE browser, iPhone Safari browser and the built-in browser of Android system to log onto the router, to view the content of the mobile storage device, configure the parameter of the router. 6.1 Wireless client devices first need to connect wireless router (take iPad as an example) Step1: open the iPad main interface, choose “Setup”→”WLAN”, to enter WiFi setup interface, open the wireless switch, iPad will automatically scan the surrounding wireless network, we can find router of “3G WiFi xxx” SSID name, double click to connect. Step2: During connection, input the WiFi password on the back of the router shell to make connection (the password can be altered). Step3: see and set the network parameters, click the “>” button right on the connected wireless signal, it will pop up the wireless connection network parameter setup interface. (DHCP server opening by default, it is better to use DHCP.) 6.2 Enter the configuration interface of 3G WiFi router Click Safari browser, input “http://192.168.169.1” on the address bar, click Go, then can enter the interface of the router. Besides, aiming at the users of iPhone, iPad and other ios devices, we can directly input “wd” on the address bar and then click Go.
The factory setting WiFi password is rather simple, remember to change the WiFi password during first use in order to ensure the data safety. Changing method: Click the WiFi Safety icon to enter WiFi safety setup interface. 6.4 Set up the 3G surfing parameter After inserting the 3G wireless network card into the router’s USB port, it will automatically carry out 3G dial surfing. Click “3G” icon to enter 3G configuration interface, choose the model of 3G network card, in the dial setting, choose boot dial mode, input the dial parameter provided by 3G ISP, click OK, auto recognition mode by default, plug and play, needs no modification.
Under wired WiFi mode, it is used as a wireless router, the Ethernet port as WAN port, all wireless terminals can only connect to the router through WiFi to surf Internet. Click “Network setting” - “WAN”, choose the surfing mode according to the front end broadband, supports 3 common wired surfing modes: static IP, dynamic IP, PPPoE.
If the access mode is static IP that the network provider gives, you needs to input ISP or ask the administrator to give you a IP address, subnet mask, gateway, DNS server, backup DNS server.
If the access mode is dynamic IP that the network provider gives, then you needs no setting, click OK, Static IP is the common surfing mode of hotels. C. PPPoE
If your surfing mode is “ADSL PPPOE” mode, just needs to input the account information that the ISP provides you on the “User name” and “Password”, click OK. D. Wireless relay If you want to use Wireless relay mode, just choose “wan wifi modes”, click “scan all AP”, then choose the wireless Ethernet port you want to relay, input password and click OK.
Click the left menu, “Wireless network setting’ - “Basic setting”, you can have wireless network settings of network mode, SSID, wireless channel and other basic settings.
It provides a USB port, U disk or HDD card reader to have connection, supports sharing and visiting of the storage devices’ content in wireless way. Take ios platform as an example, can use the third-party stream media software to play, upload, download the sharing files of the USB storage, such as Goodplayer, OPlayerHD, TIOD and Aceplayer. Step1: insert U disk, HDD and other USB storage devices into the USB port of the router. Step2: open the switch of the router to check its blue LED status indicator light. Step3: open the iPad’s WiFi setting, choose SSID of the 3G WiFi device to have wireless network connection. Step4: click Safari browser, input “http://192.168.169.1” or “wd” on the address bar, click Go, then click Multimedia viewing icon, can enter the router’s mobile storage file browsing interface, you can quickly visit the pictures, videos, music and other files in the U disk or the HDD. Directory: CDDriver CDDriver -> Quick Installation Manual Enterprise High Gain Wireless Router CDDriver -> Wireless P2p camera Chapter 1 Features Chapter 2 Installation Chapter 3 pc monitor Chapter 4 Cellphone monitor Chapter 5 wifi/ User and Password /tf card setting Chapter 1 Features new Download 30.33 Kb. Share with your friends:
|