A. Education



Download 227.43 Kb.
Page1/4
Date19.10.2016
Size227.43 Kb.
  1   2   3   4
CURRICULUM VITAE

GREGORY JOHN THOMPSON

I. Professional Background


A. Education


Ph.D. (Mechanical Engineering) West Virginia University (September 1995)

M.S.M.E. West Virginia University (May 1991)

B.S.M.E. West Virginia University (May 1989)

B. Employment History


1. Research and Teaching Experience

a. Associate Professor, Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, West Virginia, 2009-Present.

b. Assistant Professor, Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, West Virginia, 2003-2009.

c. Research Assistant Professor, Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, West Virginia, 1995-2003.

2. Management Experience

a. President, Secure Energy, Inc., a West Virginia Corporation, June 1992 - May 1993.


C. Honors and Professional Organizations


American Society for Engineering Education (ASEE)

The Scientific Research Society of North America (Sigma Xi)

Mechanical Engineering Honor Society (Pi Tau Sigma)

American Society of Mechanical Engineers (ASME)

Society of Automotive Engineers (SAE)

Engineer in Training (EIT) West Virginia #5779


D. Awards


Academies of Distinguished Alumni Teaching Award, Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, WV, 2011.

Forest R. McFarland Service Award, Society of Automotive Engineers, Warrendale, PA, 2000.

Ralph R. Teetor Educational Award, Society of Automotive Engineers, Warrendale, PA, 1999.

Young Researcher of the Year, College of Engineering and Mineral Resources, West Virginia University, 1996-97.

II. Instruction

A. Teaching Students


Spring 2015 MAE 321 Applied Thermodynamics 82

Spring 2015 MAE 102 Introduction to MAE Design 19

Fall 2014 MAE 521 Advanced Thermodynamics I 17

Fall 2014 MAE 525 Heavy Duty Vehicle Emissions 10

Spring 2014 MAE 321 Applied Thermodynamics 117

Spring 2014 MAE 102 Introduction to MAE Design 18

Fall 2013 MAE 241 Statics 107

Fall 2013 MAE 454 Machine Design       89

Summer 2013 MAE 320 Thermodynamics 13

Spring 2013 MAE 321 Applied Thermodynamics 77

Spring 2013 MAE 454 Machine Design       22

Fall 2012 MAE 525 Heavy Duty Vehicle Emissions 14

Fall 2012 MAE 454 Machine Design       85

Summer 2012 MAE 454 Machine Design 5

Spring 2012 MAE 321 Applied Thermodynamics 77

Fall 2011 MAE 320 Thermodynamics             68

Fall 2011 MAE 454 Machine Design       103

Summer 2011 MAE 454 Machine Design 20

Spring 2011 MAE 321 Applied Thermodynamics 90

Spring 2011 MAE 320 Thermodynamics 51

Fall 2010 MAE 454 Machine Design 86

Fall 2010 MAE 525 Vehicle Emissions 15

Summer 2010 MAE 454 Machine Design 9

Spring 2010 MAE 621 Advance Thermodynamics 15

Spring 2010 MAE 321 Applied Thermo 90

Fall 2009 MAE 454 Machine Design 77

Fall 2009 MAE 320 Thermodynamics 87

Summer 2009 MAE 454 Machine Design 17

Spring 2009 MAE 321 Applied Thermo 82

Spring 2009 MAE 320 Thermodynamics 81

Fall 2008 MAE 593H Hybrid Emissions 28

Spring 2008 MAE 321 Applied Thermo 72

Fall 2007 MAE 454 Machine Design 58

Spring 2007 MAE 321 Applied Thermo 78

Spring 2007 MAE 593H Hybrid Emissions 31

Summer II 2006 MAE 454 Machine Design 21

Spring 2006 MAE 321 Applied Thermo 78

Fall 2005 MAE 454 Machine Design 71

Summer II 2005 MAE 454 Machine Design 13

Spring 2005 MAE 593H Hybrid Emissions 31

Fall 2004 MAE 454 Machine Design 67

Summer II 2004 MAE 454 Machine Design 26

Fall 2003 MAE 454 Machine Design 69

Summer II 2003 MAE 454 Machine Design 21

Fall 2002 MAE 693 Ground Vehicle Propulsion 3

Summer II 2002 MAE 454 Machine Design 21

Fall 2001 MAE 320 Thermodynamics 55

Fall 2000 MAE 41 Statics 45

Summer I 1998 MAE 41 Statics 10

Fall 1997 ENGR 1 39

Spring 1997 MAE 42 Dynamics 53

B. Graduate Student Thesis Advisor


Huang, Xian - “Thermal and Structural Analysis of a Quarter MSME

Wave Coaxial Cavity Resonator Plasma Plug” (12/97)


Panneer, Ganesh - “School Bus Crashworthiness” MSME

(5/98)
Chambers, William - “Engine Instrumentation and Data MSME

Analysis for Ignition System Testing” (12/98)
Gibble, John – “Comparison of Heavy-Duty Diesel Engine MSME

Emissions Between an On-road Route and Engine (8/03)

Dynamometer Simulated On-Road Cycle”
Nuszkowski, John – “Staten Island Ferry Emissions Reduction” MSME

(8/05)
Laeeq, Muhammad – “Performance Evaluation of Dryer Units MSME

Used in Diesel Emission Measurement Systems” (8/05)
Bolyard, Jason – “Evaluation of an Air-to-Fuel Ratio Derived MSME

Exhaust Flow Rate for In-Use Emissions Testing” (11/05)


Moynahan, Nathan – “Development of a Vehicle Road Load MSME

Model for ECU Broadcast Power Verification In On-Road (12/05)

Emissions Testing”
Reddy, Varakala – “Evaluation of Current and Early Production MSME

Electronically Controlled Heavy-Duty Diesel Engine (8/06)

Emissions Based on Fuel Property Differences”
Govindareddy, Mahesh – “Validation of NOx and PM Correction MSME

Factors for Heavy Duty Diesel Engines” (8/06)


Moles, Nathaniel – “Investigation of Techniques and Effects MSME

of Diesel Particulate Filter Cleaning” (8/06)


Taylor, Eric – “Filter Weighing Procedure for 2007 and Newer MSME

Heavy Duty Diesel Engines” (8/06)


Tincher, Robert – “Evaluation of Heavy Duty Diesel Engines MSME

Regulated Emissions Based on Variation of Fuel (8/06)

Properties by Use of Additives”
Muralidharan, Abishek – “Evaluation of Heavy-Duty Engine MSME

Exhaust Evaluation of Heavy-Duty Engine Exhaust (12/07)

Hydrocarbon and Non-Methane Hydrocarbon Analysis

Methods”
Arter, Micah – “The Effects of Diesel Fuel Density on Fuel MSME

Consumption Measurements of Portable In-use Emissions (12/07)

Measurement Systems”


Nuszkowski, John – “The Effect of Fuel Additives on Diesel Engine Ph.D.

Emissions During Steady State and Transient Operation” (7/08)


Flaim, Kevin – “Study of the Variations in Continuous Diesel MSME

Particulate Matter Size Measurements and Effect of Fuel (7/08)

Properties on DPM Size”
Hardin, John– “Quantification of Soluble Organic Fraction MSME

Measurement Variation in Diesel Particulate Matter (12/08)

Emissions”
Ursic, Mike – “Influence of accelerator pedal position control on MSME

heavy duty diesel engine emissions and performance” (5/09)


Newlin, Geoff – “Fuel Economy and Emissions Benefits from MSME

Diesel Fuel Additives” (8/09)


Dam, Mrinmoy – “Heavy-duty Diesel Engine Oil Aging Effects on MSME

Emissions” (5/10)


Perry, James R. – “Recommended Regeneration Strategies for MSME

Active Diesel Particulate Filters with Electrically Induced (12/11)

Filtering Media to Enhance Filtration Efficiency”
Music, Nathan S. – “Comparison of a Work-Based Window MSME

Method to NTE Method for Reporting In-Use Emissions” (12/11)

Baddam, Praveen Reddy – “Measurement of Road Grade for MSME

In-Use Emission Testing Assessment” (5/12)


Delgado, Oscar – “Driving Cycle Properties and their Influence on Ph.D.

Fuel Consumption and Emissions” (8/12)

Morgan, Cory – “Evaluation of Hydrotreated Biofuels for Use in MSME

Naval Diesel Engines” (8/14)


Nagowski, Molly – “Untitled” MSME

(5/15)
Yalamanchi, Vijay – “Untitled” MSME

(5/15)
Bolyard, Jason – “Untitled” Ph.D.

(8/15)
Wolfe, Jackson – “Untitled” Ph.D.

(8/15)
Ryskamp, Ross – “Untitled” Ph.D.

(8/15)




Download 227.43 Kb.

Share with your friends:
  1   2   3   4




The database is protected by copyright ©ininet.org 2020
send message

    Main page