Subject Areas:
Automotive Parts and Tools
Mechanical Knowledge
Supervision
Recommended Study Guides:
ARCO.
|
Automotive Mechanic - Auto Serviceman
|
ARCO.
|
Mechanical Knowledge
|
ARCO.
|
Supervision
|
You may want to use any available resource materials relative to the above subject areas.
Automotive Parts and Tools
-
Of the following, the best tool to use to undercut mica on the commutator of a starting motor, is a:
-
round nose chisel
-
hacksaw blade
-
flat chisel
-
hand reamer
-
Compression piston rings for gasoline-powered engines are generally made from:
-
copper
-
high-quality cast iron
-
aluminum
-
tempered steel
-
The item that is usually located between the cylinder head and the block is a:
-
gasket
-
cushion
-
filler
-
shim
-
A standard 12-volt automotive lead acid storage battery has:
-
2-cells
-
4-cells
-
6-cells
-
8-cells
-
An automobile mechanic usually uses a wire gauge for checking:
-
spark plug gaps
-
the resistance of secondary circuit wires
-
the diameter of secondary circuit wires
-
the wall thickness of tubing
Mechanical Knowledge
-
In an in-line gasoline-powered automotive engine, the manifold heat-control value is mounted to the:
-
intake manifold
-
cylinder head
-
exaust manifold
-
crankcase
-
An automobile is standing still with the engine running and the clutch disengaged. Of the following the part of the clutch assembly that is stationary is the:
-
flywheel
-
clutch cover
-
pressure plate
-
clutch disk
-
A clicking or tapping noise which persists after the engine has warmed up is usually caused by:
-
loose fan belts
-
loose main bearings
-
defective valve lifters
-
worn pistons pins
-
A common indicator that the electrical system of a car is permitting a led-acid storage battery to become overcharged is:
-
dim headlights
-
slow cranking
-
the necessity of frequent addition of battery water
-
the formation of white powder on the battery terminals
Supervision
-
The primary responsibility of a supervisor is to:
-
create among his/her subordinates a negative attitude toward departmental
objectives
-
make certain that all subordinates are treated equally as to the assignment of tasks
-
see that the required work is performed properly
-
establish a relationship of mutual confidence between himself/herself and the subordinates
-
A supervisor should be aware that most subordinates will ask questions at meetings or group discussions in order to:
-
stimulate other employees to express their opinions
-
discover how they may be affected by the subjects under discussion
-
display their knowledge of the topics under discussion
-
consume time in order to avoid returning to their normal tasks
-
The principle relating to the number of subordinates who can be supervised effectively by one supervisor is COMMONLY known as:
-
span of control
-
optimum personnel assignment
-
delegation of authority
-
organizational factor
Answers to Sample Test Questions / Automotive Mechanic
Automotive Parts and Tools
1) 2
2) 2
3) 1
4) 3
5) 1
Mechanical Knowledge
1) 3
2) 4
3) 3
4) 3
Supervision
1) 3
2) 2
3) 1
|