G36 Manual User Please read the instruction manual before use, in order to properly installed and rapid use, product color please in kind prevail Preparation

Please read the instruction manual before use, in order to properly installed and rapid use, product color please in kind prevail

1. 
   Testing equipment model is correct，accessories is complete.
   
2. 
   Select GSM network SIM card, Refer to the opinions of the dealer.( Keep power off before install card)
   
3. 
   Watch SIM card open GPRS function and Caller Identification.
   
4. 
   Install the App Client on phone,client details Refer to the opinions of the dealer.
   
5. 
   Registered user by Barcode or two-dimension code
   

• 
  The dual control mode, mobile client or computer GPRS service platform
  
• 
  GPRS real-time positioning, tracking, monitoring;
  
• 
  Health plan step;
  
• 
  SOS emergency alarm;
  
• 
  Bluetooth anti lost;
  
• 
  Electronic fence；
  
• 
  Low battery alarm function
  
• 
  Take off the watch alarm
  
• 
  Remote shutdown
  

key2：

Family Number1

Volume +

Power Button,

Hang up

USB interface

Key4：

Family Number2

Volume -

Key1：

Sos key,

1 .App Registration

Login account for the terminal id number, password is 123456 by default, the password can be modified.

In the APP interface enter the correct account and password, click login, enter the main interface, as shown in the figure below:

2 The APP menu interface function

In the function menu can be set up to query and terminal related parameters, as shown in the figure below:

Anti-lost instructions：

Attention：Anti-lost function temporary support only android version, does not support IOS version. Pairing bluetooth pairing code for 1234, match the voice remind client, bluetooth disconnected, a voice alarm also reminded, after can stop alarm or shut down in the lost function

Step： .

⑵Start the Anti-lost

⑶SearchingWatch

⑷Binding Watch,click watch id（id is your phone’s Bluetooth id）

⑸Client connect watch bluetooth，pairing number 1234

⑹ Pairing is successful, the terminal will be Chinese characters: bluetooth connection, the client will ring (a short ring)

⑺ Once disconnect bluetooth, terminal in Chinese characters: bluetooth disconnect, the client receives the alarm push and rang the bell, click on the alarm ring a bell push for confirmation
Electronic fence: android click map can determine center;Ios version need to hold the map straight while still, determine the central point.
3 setup instructions
In the Settings, the terminal information can be set, as shown in the figure below：

Special setup instructions:

GPS work time: can be set up four periods, namely in setting the time period of terminal GPS work carried out in accordance with the current upload interval mode;

GPS work mode: two work modes: power saving mode, 10 minutes to upload a location data, the data is dormant, shut down.GPS;Real-time positioning mode: a 10 second positioning data, GPS has been opened, the power consumption.

Set SOS number: can be set up three number, terminal hold the SOS in an emergency alarm button 3 seconds.

4 terminal alarm

Terminal after all kinds of alarm, alarm push will be sent to the client, mobile client click alarm push notifications, enter alarm list for details
Terminal working mode

Three basic working model, respectively mode 1 and mode 2, model 3, the working mode is decided by the upload interval.

Pattern 2: upload interval is more than 300 seconds, the default terminal working mode, upload interval is 600 seconds;

Pattern 3: in the client Settings of GPS time outside working time for the pattern, closing of GPS, not upload location data;

Upload interval can only temporarily set the platform, if you need rapid positioning, real-time open GPS, can install GPS work time length, the app sends instructions positioning, terminal immediately into the pattern 1, upload interval to 10 seconds.