Health, safety and environment specification
Download 1.25 Mb.
|
- Navigate this page:
- SP2000 Road Safety Standard
- 1Introduction
- 1.2Scope
    
 Version 3.0 1.1.001.0Revision HEALTH, SAFETY AND ENVIRONMENT SPECIFICATION SP2000 Road Safety Standard(Complies with the OPAL Upstream Operators Road Safety Standard)DOCUMENT ID - SP 2000 VERSION - 3.0 DATE - 15.08.2009 
The following is a brief summary of the four most recent revisions to this document. Details of all revisions prior to these are held on file by the Document Custodian.
User Notes: The requirements of this document are mandatory. Non-compliance must only be authorised by the road safety focal point (PDO: MSE/15) through STEP-OUT approval. A controlled copy of the current version of this document is on PDO's EDMS. Before making reference to this document, it is the user's responsibility to ensure that any hard copy, or electronic copy, is current. For assistance, contact the Document Custodian. This document is the property of PDO. Neither the whole nor any part of this document may be disclosed to others or reproduced, stored in a retrieval system, or transmitted in any form by any means (electronic, mechanical, reprographic recording or otherwise) without prior written consent of the owner. Contents 1 Introduction 6 2 Drivers and Driving 27 3 Vehicles 96
APPENDICES Appendix I: Rollover Protection Devices Specification Appendix II: Roadworthiness Assurance Standard Appendix III: Safe Journey Management Procedure Appendix IV: Convoy Movements
1.1PurposePDO operations rely heavily on road transport. To date, one of the greatest contributors to incidents experienced in PDO has been Road Traffic Accidents (RTAs). This Specification describes PDO's minimum requirements for managing road transport safety. Appendices I, II, III, and IV form an integral part of this Specification. 1.2ScopeThis Specification applies to:
Load securing and load safety are fully addressed in Specification 2001, “Load Safety and Restraining” available from MSE/15, directly from Livelink or http://www.pdo.co.om/hseforcontractors/blocks/documentation/document.html The applicable HSE Case for overall Road Transport safety compliance is GU432 which all people involved in road transport safety should be aware of, understand and utilise to ensure compliance with Company road safety standards, The requirements of this Specification do not apply to lifting and handling equipment or to earthmoving equipment which are covered in the following documents:
Note that specifications for roads are covered in the following documents which do not form part of this Specification:
Directory: hsems -> Documents -> Specifications Specifications -> Petroleum Development Oman L. L. C. Document Title: Specification for hse cases Download 1.25 Mb. Share with your friends:
|
