http://www.Locoparts.net email: LOCOPART@erols.com Our Brake Valve is constructed from brass bar-stock. The valve disk is a lost wax casting of silicon bronze and combined with a Teflon valve seat minimizes by-pass leaking. It comes complete with inlet and outlet unions for 3/16" tube silver solder connections and is ready to install. Vent port is tapped 10-32. Spring and screws are stainless steel. Body diameter is 1-1/8". Height is approximately 2".
Price: Brake Valve ……….$95.00
LOCOPARTS Whistle Valve utilizes a stainless steel ball against the bronze valve body seat. All parts are bronze, lost wax silicon bronze, brass and stainless steel. End connections are 1/8" pipe. Price: Whistle Valve………. $45.00
4-Chime Whistle is 1-1/2" diameter x approximately 12" long, constructed of a brass tube over a cast aluminum core. End connection is 5/16" silver solder union. Price: 4-Chime Whistle ..$150.00 Kit …$75.00
The Boiler Check Valve is fabricated from all brass bar stock. The valve uses a fluted shuttle seating against an o-ring seat. Outlet connection is 5/16" tube silver solder union. Boiler end is 1/8” pipe.
Price: Boiler Check Valve …..$60.00
The Tender Hand Pump is made from castings of red brass, and trimmed with brass bar stock fittings and stainless steel fasteners. Outlet fittings are threaded 1/4" pipe. Piston diameter is 1". Approximate dimensions are 8" l x 3"w x 6" h. Price: Tender Hand Pump…… $275.00
Kit ………………………..…….$125.00
The Tender Water Valve is one of the most unique items we offer. It comes complete with handwheel, and as with all our products, it is ready to install. To install, drill a 7/8" diameter hole in the tender bottom in the front end of the water leg (or wherever you may choose to place the valve) and match drill 6 clearance holes for 8-32 screws (not included). The valve is then inserted from the bottom. No more having to remove the top to remove and/or service the valve. When ordering, you must specify the outside distance between the bottom and the top as these valves are custom made upon order to suit your requirements. NOTE: Valves for Allen tenders are stock items.
Price: Tender Water Valve ………$55.00
The Gauge Glass is available as either the glass alone or as a complete assembly. The glass alone features male 5/16" MTP threads and pyrex glass. The assembly comes complete with valves and unions on both ends. The assembly measures 5-1/2” between union ends. The bottom end requires a 1/8" pipe threaded hole in the backhead. See note. Thereafter, when removing for service loosen the two unions and the whole assembly comes off. Glass size is ½”. NOTE: Backhead fitting ¼” IPS avail special order.
Price: Gauge glass only $45.00
Standard Gauge glass assembly $145.00 Short(1-1/2” long glass) Gauge glass assy $145
ttp://www.Locoparts.net email: 
he 
he 
nions