Set portfolio Research Publications 2003 set portfolio Office 2 Aerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 13 Civil & Chemical Engineering



Download 382.54 Kb.
Page1/8
Date20.10.2016
Size382.54 Kb.
  1   2   3   4   5   6   7   8


SET Portfolio
Research Publications 2003


SET Portfolio Office 2
Aerospace, Mechanical & Manufacturing Engineering 3
Applied Sciences 13
Civil & Chemical Engineering 27
Computer Science & Information Technology 33
Electrical & Computer Engineering 40
Health Sciences 55
Mathematical & Geospatial Sciences 58
Medical Sciences 64

SET Portfolio Office



Journal Articles
Chang, R. 2003, 'When Adult Learners Argue: A Preliminary Approach to Conflict in a TAFE Writing Workshop', in The Journal of the Australian Association of Writing Programs, Australian Association of Writing Programs, Australia, vol. 7, no. 1, ISSN 1327-9556
Galatsis, K., Cukrov, L., Wlodarski, W., McCormick, M., Kalantar-Zadeh, K., Comini, E. and Sberveglieri, G. 2003, 'p-and n-type Fe-doped SnO2 gas sensors fabricated by the mechanochemical processing technique', in Sensors and Actuators B: Chemical, Elsevier, Lausanne, vol. 93, no. 93, pp. 562-565, ISSN 0925-4005
McDonald, B., Rogers, P. and Kefford, B. 2003, 'Teaching people to fish? Building the evaluation capability of public sector organisations', in Evaluation, Sage Publications, London, vol. 9, pp. 9-29, ISSN 1356-3890
Rogers, P. and Fraser, D. 2003, 'Appreciating appreciative behaviour', in New Directions for Evaluation, Jossey-Bass Publishers, San Francisco, vol. 100, pp. 75-83, ISSN 1097-6736
Sim, J., Zadnik, M. and Radloff, A. 2003, 'University and workplace cultures: their impact on the development of lifelong learners', in Radiography, W.B Saunders Co. Ltd, United Kingdom, vol. 1, no. 2, pp. 99-107, ISSN 1078-8174
Conference Publications
Allan, G., Zylinski, J., Temple, V., Hislop, J. and Gray, K. 2003, 'The use of E-portfolios to enhance student learning: a Faculty-level strategy and experience', ASCILITE 2003, G. Crisp et al. (ed.), ASCILITE, Australia (ASCILITE 2003 Adelaide)
Behncke, L. 2003, 'Two tribes: Experiences in purpose, reason and need in reconciliation', International Perspectives on Peace and Reconciliation, 2003 Flagship Conference Committee (ed.), University of Melbourne (International Perspectives on Peace and Reconciliation)
Behncke, L. 2003, 'Quality knowledge and experiences in higher education', Systemics, Cybernetics and Informatics, SCI 2003 Program Committee (ed.), The International Institute of Informatics and Systemics, USA (7th World Multi-Conference on Systemics, Cybernetics and Informatics)

Chang, R., Gray, K., Jansz-Senn, A., Sendzuik, P. and Radloff, A. 2003, 'Action Learning as an Approach to Staff Development in Tertiary Education', Adult Learning Australia, R. Morris (ed.), University of Technology, Sydney (43rd Annual National Conference of Adult Learning Australia)


Gray, K. 2003, 'Education for environmental sustainability in a capacity-based health sciences curriculum', ISOS Conference, J. Goldie et al. (ed.), ISOS, Canberra (ISOS Conference 2003)
Jollands, M., Wright, S. and Swinbourne, D. 2003, 'Restructuring trhe lecture/tutorial model for effective learning', Proceedings of the 14th Annual Conference of Australasian Association for Engineering Education and 9th Australasian Women in Engineering Forum, A/Prof. Allison Brown (ed.), Australasian Association for Engineering Education, Melbourne, Australia (Australasian Associaton of Engineering Conference 2003)
Pannan, L. and McGovern, J. 2003, 'Mainstreaming online delivery: Staff experience and perceptions', Proceedings of the 20th Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education, G. Crisp et al. (ed.), ASCLITE, Adelaide (20th Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education)
Pannan, L., McGregor, K., van der Craats, C., Ghosn, K. and Montoya, M. 2003, 'An online laboratory – Is it as good as the real thing?', Improving Learning Outcomes Through Flexible Science Teaching: Proceedings of the UniServe Science Symposium, K. Placing (ed.), Uniserve Science, Sydney (UniServe Science Symposium)
Singh, S., Burke, J., Turner, P. and Castro, M. 2003, 'The discovery phase of user centred design: putting users first in the design of smart internet technologies', 4th International We-B Conference 2003 - e-Business and Information Systems: Proceedings, S. Knight (ed.), Edith Cowan University, Australia (4th International We-B Conference 2003 - e-Business and Information Systems)


Aerospace, Mechanical and Manufacturing Engineering



Book Chapters
Gutaj, F. and John, S. 2003, 'Effects of Geometry and Handle Stiffness Variations on Cricket Bat Vibration Characteristics', in Sports Dynamics: Discovery and Application, RMIT University, Melbourne, pp. 76-82, ISBN 0-86459-272-8
Mouritz, A. 2003, 'Non-Destructive Evaluation of Damage Accumulation', in Fatigue in Composites, Woodhead Publishing, Cambridge, UK, pp. 242-266, ISBN 1 85573 608 X
Subic, A. and Cooke, A. 2003, 'Materials in Cricket', in Materials in Sports Equipment, Woodhead Publishing, Cambridge, UK, pp. 342-376, ISBN 1-85573-5997
Trivailo, P. and Gilbert, T. 2003, 'Structures: Overview of Non-linear Finite Element Modelling of Flexible Manoeuvring Structures', in Coupling of Fluids, Structures and Waves in Aeronautics. Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Volume 85, Springer, Berlin, pp. 129-142, ISBN 3-540-40222-5
Journal Articles
Alam, F., Watkins, S. and Zimmer, G. 2003, 'Mean and Time-Varying Flow Measurements on the Surface of a Family of Idealised Road Vehicles', in Experimental, Thermal and Fluid Science, Elsevier, New York, vol. 27, pp. 639-654, ISSN 0894-1777
Bayandor, J., Thomson, R., Scott, M., Nguyen, M. and Elder, D. 2003, 'Investigation of Impact and Damage Tolerance in Advanced Aerospace Composite Structures', in International Journal of Crashworthiness, Woodhead Publishing, Cambridge, UK, vol. 8, pp. 297-306, ISSN 1358-8265
Chen, L., Tu, J. and Yeoh, G. 2003, 'Numerical Simulation of Turbulent Wake Flows Behind Two side-by-side Cylinders', in Journal of Fluids and Structures, Elsevier, England, vol. 18, pp. 387-403, ISSN 0889-9746
Ciesielski, V., Innes, A., John, S. and Mamutil, J. 2003, 'Genetic programming for landmark detection in cephalometric radiology images', in International Journal of Knowledge-based Intelligent Engineering Systems, IOS Press, The Netherlands, vol. 3, pp. 164-171, ISSN 1327-2314
Gibson, A., Wright, P., Wu, Y., Mouritz, A., Mathys, Z. and Gardiner, C. 2003, 'Modelling Residual Mechanical Properties of Polymer Composites After Fire', in Plastics, Rubber and Composites, IOM Communications, UK, vol. 32, pp. 81-90, ISSN 1465-8011
Kumar, K., Kumar, S., Sharma, A. and McLachlan, N. 2003, 'VisualHand Gestures Classification Using Wavelet Transforms', in International Journal of Wavelet Multiresolution Information Processing IJWMIP, World Scientific, Singapore, vol. 1, no. 4, pp. 373-392, ISSN 0219-6913
Li, Y., Yeoh, G. and Tu, J. 2003, 'Numerical Investigation of Static Flow Instability in a Low-pressure Subcooled Boiling Channel', in Heat and Mass Transfer, Springer, Berlin, vol. 38, pp. 1-21, ISSN 0947-7411
Mouritz, A. 2003, 'Fire Resistance of Aircraft Composite Laminates', in Journal of Materials Science Letters, Kluwer Academic, Norwell, USA, vol. 22, pp. 1507-1509, ISSN 0261-8028
Mouritz, A. 2003, 'Simple Models for Determining the Mechanical Properties of Burnt FRP Composites', in Materials Science and Engineering, Elsevier, Oxford, vol. A359, pp. 237-246, ISSN 0921-5093
Mouritz, A. 2003, 'Comment on the Impact Damage Tolerance of Streched Comoposites', in Journal of Materials Science Letters, Kluwer Academic, Norwell, USA, vol. 22, pp. 519-521, ISSN 0261-8028
Rudov-Clark, S., Mouritz, A., Lee, L. and Bannister, M. 2003, 'Fibre Damage in the Manufacture of Advanced Three-Dimensional Woven Composites', in Composites A: Applied Science and Manufacturing, Elsevier, Oxford, vol. 34, pp. 963-970, ISSN 1359-835X
Thoroughgood, D., Al-Dabbagh, M. and Bates, I. 2003, 'Design of a cost-effective household concentrated photvoltaic energy system', in Journal of Electrical & Electronics Engineering Australia, Engineers Australia College of Electrical Engineers, Sydney, vol. 22, no. 3, pp. 173-178, ISSN 0725-2986
Tong, P., Galanis, G. and Bil, C. 2003, 'Sensitivity Analysis to a Forced Landing Manoeuvre', in Journal of Aircraft, American Institute of Aeronautics and Astronautics, Reston, VA, vol. 40, pp. 208-210, ISSN 0021-8669
Watkins, S. 2003, 'Development of a Micro Air Vehicle', in The Aeronautical Journal, Royal Aeronautical Society, London, vol. 107, pp. 117-123, ISSN 0001-9240
Williams, P., Yeo, S. and Blanksby, C. 2003, 'Heating and Modelling Effects in Tethered Aerocapture Missions', in Journal of Guidance, Control and Dynamics, American Institute of Aeronautics and Astronautics, Reston, VA, vol. 26, pp. 643-654, ISSN 0731-5090
Williams, P., Blanksby, C. and Trivailo, P. 2003, 'Tethered Planetary Capture: Controlled Maneuvers', in Acta Astronautica, Elsevier Science, London, vol. 53, pp. 681-708, ISSN 0094-5765
Conference Publications
Abanteriba, S. 2003, 'Simulation of Altitude Influence on Piston Ring Movement and Blow-by Effects in Piston Engines', Proceedings of the 4th ASME/JSME Joint Conference on Fluid Engineering, C. Clark (ed.), ASME, New York (Fourth ASME/JSME Joint Conference on Fluid Engineering)
Abu-Hijleh, B., Tu, J., Subic, A. and Fostineo, L. 2003, 'Effect of Inlet/Outlet Fillets on the Clearance Flow in a Rotor-casing Assembly', Proceedings of the International Congress on Modelling and Simulation, D. A. Post (ed.), Modelling and Simulation Society of Australia and New Zealand, Canberra (International Congress on Modelling and Simulation (MODSIM 2003))
Abu-Hijleh, B., Tu, J. and Subic, A. 2003, 'Entropy Generation Reduction in a Rotor-casing Assembly using Inlet and Outlet Fillets', Proceedings of the First International Conference on Computational Methods in Fluid Power Technology, J. S. Stecki (ed.), Fluid Power Net Publications, Melbourne (First International Conference on Computational Method in Fluid Power Technology)
Akmeliawati, R., Panella, I., Hill, R. and Bil, C. 2003, 'Stabilisation of a Tailless Fighter Using Thrust Vectoring', Proceedings of the 10th Australian International Aerospace Conference, D. J. Mee (ed.), Engineers Australia, Barton, ACT (Tenth Australian International Aerospace Congress)
Alam, F., Watkins, S. and Subic, A. 2003, 'Aerodynamics of a Rugby Ball and Australian Rules Football', Proceedings of the 5th International Conference on Mechanical Engineering, D. K. Das et al. (ed.), Bangladesh University of Engineering and Technology, Dhaka, Bangladesh (Fifth International Conference on Mechanical Engineering)
Alam, F., Subic, A. and Watkins, S. 2003, 'An Experimental Study on the Aerodynamic Drag of a Series of Tennis Balls', Sports Dynamics: Discovery and Application, A. Subic et al. (ed.), RMIT University Press, Melbourne (International Conference on Sports Dynamics)
Alam, F., Watkins, S. and Subic, A. 2003, 'A Study of Aerodynamic Properties of a Rugby Ball and an Australian Rules Football', Sports Dynamics: Discovery and Application, A. Subic et al. (ed.), RMIT University Press, Melbourne (International Conference on Sports Dynamics)
Alam, F., Zimmer, G. and Watkins, S. 2003, 'A Study of the A-Pillar Vortex of a Passenger Car', Proceedings of the 5th International Conference on Mechanical Engineering, D. K. Das et al. (ed.), Bangladesh University of Engineering and Technology, Dhaka, Bangladesh (5th International Conference on Mechanical Engineering)
Andrews, J. and Bunting, A. 2003, 'Towards Sustainable Engineering at RMIT University', Proceedings of the 14th Annual Conference of the Australian Association for Engineering Education, A. Brown (ed.), Australian Association for Engineering Education, Melbourne (14th Annual Conference of the Australian Association for Engineering Education)
Awaja, F., Daver, F. and Kosior, E. 2003, 'Optical Properties of Bottles Produced by ISBM using a Blend of RER-PET and Virgin PET', Proceedings of the PPS-19 Polymer Processing Society , 19th Annual Meeting, C. Tiu et al. (ed.), RMIT University Press, Melbourne (PPS-19 Polymer Processing Society, 19th Annual Meeting)
Banks, R., Coman, F., John, S. and Rosu, R. 2003, 'Prepreg Tack', Proceedings of the 10th Annual International Conference on Composites/Nano Engineering, D. Hui (ed.), University of New Orleans, New Orleans (Tenth Annual International Conference on Composites/Nano Engineering)
Banks, R., Coman, F., John, S., Rosu, R. and Cook, W. 2003, 'Control Parameters in the Manufacture of Prepregs', Proceedings of the 14th International Conference on Composite Materials, T. Hahn and M. Martin (ed.), Society of Manufacturing Engineers, Dearborn, Michigan (14th International Conference on Composite Materials)
Bayandor, J., Thomson, R. and Scott, M. 2003, 'Parametric Sensitivity of an Advanced Composites Bi-Phase Explicit Finite Element Solver', Proceedings of the 14th International Conference on Composite Materials, T. Hahn (ed.), Society of Manufacturing Engineers, Dearborn, Michigan (14th International Conference on Composite Materials)
Bayandor, J., Thomson, R. and Scott, M. 2003, 'An Investigation into an Advanced Composites Explicit Bi-phase Module', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (10th Australian International Aerospace Congress)
Bayandor, J. 2003, 'Advanced Unsteady Flow Control', Proceedings of 4th ASME/JSME Joint Fluids Engineering Conference, A.Ogut et al. (ed.), American Society of Mechanical Engineers, New York (4th ASME-JSME Joint Fluids Engineering Conference)
Bil, C. and Peebles, C. 2003, 'Numerical Optimisation Software Speedup using Parallel Computing', Proceedings of the APAC Conference and Exhibition on Advanced Computing, Grid Applications and eResearch, J. Young and R. Chhabra (ed.), Victorian Partnership for Advanced Computing, Melbourne (APAC Conference and Exhibition on Advanced Computing, Grid Applications and eResearch)
Bil, C., Wong, K., Sinha, A. and Thompson, L. 2003, 'Advancing UAV Technologies through Australian Research', Proceedings of the AIAA/ICAS International Air and Space Symposium and Exposition: The Next 100 Years, D. Weatherington and T. J. Kwang (ed.), American Institute of Aeronautics and Astronautics, Washington, DC (AIAA/ICAS International Air and Space Symposium and Exposition)
Bons, W. and McLay, A. 2003, 'Re-Engineering Curricula for Tomorrow's Engineers', Proceedings of the 14th Annual Conference for Australasian Association for Engineering Education, A. Brown (ed.), Australasian Association for Engineering Education, Melbourne (14th Annual Conference for Australasian Association for Engineering Education)
Bourmistrova, A. and Bil, C. 2003, 'Systematic Approach to Mission Management Validation using the UAV', Proceeedings of the UAV Asia-Pacific 2003, H. Stone et al (ed.), Reed Business Information, Surrey, UK (UAV Asia-Pacific 2003)
Bourmistrova, A. and Bil, C. 2003, 'Non-linear Mathematical Modelling and Simulation of a UAV System', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Bourmistrova, A. and Bil, C. 2003, 'Autonomous Control Reliability versus UAV Survivability', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Boxer, L. and John, S. 2003, 'A positioning theory approach to achieve quality university services', Proceedings of the 4th International Conference for the Advancement of Organisational Excellence, L. Boxer (ed.), Intergon, Australia (Excellence in the Face of Crisis: The 4th International Conference for the Advancement of Organisational Excellence)
Bryson, M., Akbarzadeh, A. and Dixon, C. 2003, 'Applying the Trilateral Flash Cycle to the Portland Geothermal Resource to Produce Power', Destination Renewables: From Research to Market, L. Aye and W. W. S. Charters (ed.), Australian and New Zealand Solar Energy Society, Melbourne (41st Annual Conference of the Australian and New Zealand Solar Energy Society)
Charlesworth, S. and Sinha, A. 2003, 'Methodology to Evaluate Crew Capability Requirements in Helicopter Emergency Medical Service Operations: Stage 1', Proceedings of the Fourth Australian Pacific Vertiflite Conference on Helicopter Technology, A. K. Sinha (ed.), American Helicopter Society, Melbourne (Fourth Australian Pacific Vertiflite Conference on Helicopter Technology)
Chen, L. and Tu, J. 2003, 'A Large-Eddy Simulation of Two Side-by-side Circular Cylinders in Cross Flow', Proceedings of the Second International Conference on Computational Fluid Dynamics, S. Armfield et al. (ed.), Springer, Berlin (Second International Conference on Computational Fluid Dynamics)
Chinn, A., Akbarzadeh, A. and Dixon, C. 2003, 'The Design, Construction, Operation and Maintenance of an Experimental Magnesium Chloride Solar Pond', Destination Renewables: From Research to Market, L. Aye and W. W. S. Charters (ed.), Australia and New Zealand Solar Energy Society, Melbourne (41st Annual Conference of the Australian and New Zealand solar energy Society)
Crump, M., Khantsis, S., Bil, C. and Bourmistrova, A. 2003, 'Aspects of Launch and Recovery of Fixed-Wing Unmanned Air Vehicles (UAV) from Small Surface Vessels', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Engineers Australia, Brisbane (Tenth Australian International Aerospace Congress,)
Erakovic, L., Subic, A., Abu-Hijleh, B. and McLaren, D. 2003, 'Modelling and Simulation of Chilean Needle Grass Spread during Slashing', Proceedings of the International Congress on Modelling and Simulation, D. A. Post (ed.), Modelling and Simulation Society of Australia and New Zealand, Canberra, ACT (International Congress on Modelling and Simulation (MODSIM 2003))
Fonseca, T., Akbarzadeh, A. and Andrews, J. 2003, 'Thermal Modelling of a Solar Pond', Destination Renewables: From Research to Market, L. Aye and W. W. S. Charters (ed.), Australian and New Zealand Solar Energy Society, Melbourne (41st Annual Conference of the Australian and New Zealand Solar Energy Society)
Garbutt, J., Vinay, T. and John, S. 2003, 'Establishing Limits of Kinematic Based Control for Wheeled Mobile Robots', Proceedings of the International Conference on Machine Learning: Models, Technologies and Applications, H. R. Arabnia and E. B. Kozerenko (ed.), CSREA Press, Las Vegas (International Conference on Machine Learning: Models, Technologies and Applications)
Goldstraw, M., Bil, C. and Nicholson, C. 2003, 'Aerodynamic Loads Prediction in an Integrated Computer-based Conceptual Design Environment', Proceedings of the 4th ASME/JSME Joint Conference on Fluids Engineering, J. Bayandor (ed.), American Society of Mechanical Engineers, Washington, DC (Fourth ASME/JSME Joint Conference on Fluids Engineering)
Goldstraw, M., Bil, C. and Nicholson, C. 2003, 'A Computer-based Environment for Integrated Aerodynamic and Structural Aircraft Conceptual Design', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Healey, G. 2003, 'An Introduction to the Greenhouse Benefits of Wind Power in the National Electricity Market', Destination Renewables: From Research to Market, L. Aye and W. W. S. Charters (ed.), Australian and New Zealand Solar Energy Society, Melbourne (41st Annual Conference of the Australian and New Zealand Solar Energy Society)
Innes, A., Ciesielski, V., Mamutil, J. and John, S. 2003, 'Finding templates for cephalometric landmarks using pulse coupled neural networks and genetic programming', Proceedings of the International Conference on Imaging Science, Systems and Technology, H. R. Arabnia and Y. Mun (ed.), CSREA Press, USA (International Conference on Imaging Science, Systems and Technology (CISST'03))
John, S. and Hadzic, R. 2003, 'Impact Damage Analysis of Optical Fibres in Composite Structures', Proceedings of the 10th Annual International Conference on Composites/Nano Engineering, D. Hui (ed.), University of New Orleans, New Orleans (10th Annual International Conference on Composites/Nano Engineering)
John, S. 2003, 'The Role of the Academic Intellect Model in the Corporate University', Proceedings of the 4th International Conference for the Advancement of Organisational Excellence, L. Boxer (ed.), Intergon, Melbourne (Fourth International Conference for the Advancement of Organisational Excellence)
Kumar, D. K., Kumar, S., Sharma, A. and McLachlan, N. 2003, 'Robust Classification of Visual Hand Movement Gestures', 7th World Multi-Conference on Systemics, Cybernetics and Informatics SCI 2003 Proceedings, (SCI 2003), USA, N. Kallos (ed.), SCI Proceedings, Florida (7th World Multi-Conference on Systemics, Cybernetics and Informatics SCI 2003 Proceedings)
Kumar, D. K., Sharma, A., Kumar, S. and McLachlan, N. 2003, 'Classification of Human Actions using Temporal Templates, Histograms and Orthogonal Moments', 7th World Multi-Conference on Systemics, Cybernetics and Informatics SCI2003 Proceedings (SCI2003), USA, N. Kallos (ed.), SCI Proceedings, Florida (7th World Multi-Conference on Systemics, Cybernetics and Informatics SCI2003 Proceedings)
Kusumo, R., Sinha, A. and Schrage, D. 2003, 'Application of an Integrated Decision Support System for Mid-life Upgrade of Helicopters', Proceedings of the 59th Annual Forum of the American Helicopter Society, R. Kurfeld (ed.), American Helicopter Society International, Phoenix, Arizona (59th Annual Forum of the American Helicopter Society)
Kusumo, R., Sinha, A. and Schrage, D. 2003, 'Simulation of Mission Systems Payload for Mid-life Upgrade of Helicopters', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Kusumo, R., Kanikara, S. and Sinha, A. 2003, 'A System Framework for the Capability Enhancements of an Integrated Decision Support System for Aircraft Mid-life Upgrade', Proceedings of the Fourth Australian Pacific Vertiflite Conference on Helicopter Technology, A. K. Sinha (ed.), American Helicopter Society, Melbourne (Fourth Australian Pacific Vertiflite Conference on Helicopter Technology)
Kusumo, R., Sinha, A., Hogan, P. and Laycock, K. 2003, 'Medical Emergency Helicopter Operations Pre-mission Success Remediation Sub-module', Proceedings of the Fourth Australian Pacific Vertiflite Conference on Helicopter Technology, A. K. Sinha (ed.), American Helicopter Society, Melbourne (Fourth Australian Pacific Vertiflite Conference on Helicopter Technology)
Lam, T. and Bil, C. 2003, 'Next Generation Space Transportation System using Conventional Expendable Launch Vehicles', Proceedings of the NSSA 3rd Australian Space Science Workshop, B. Nagabhushan (ed.), National Space Society of Australia, Sydney (3rd Australian Space Science Workshop)
Lansdorp, B., Blanksby, C. and Trivailo, P. 2003, 'Design of a Tether-Crawler Configuration for Space Electrodynamic Propulsion and Space Debris Mitigation', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Li, Y Z, ., Yeoh, G. and Tu, J. 2003, 'Numerical Investigation of Flow Instability in a Low-Pressure Subcooled Boiling Channel', Proceedings of the Second International Conference on Computational Fluid Dynamics, S. Armfield et al. (ed.), Springer, Berlin (Second International Conference on Computational Fluid Dynamics)
Malik, N., Akbarzadeh, A. and Meehan, B. 2003, 'Control of Algae in Salinity Gradient Solar Ponds and Its Impact on Their Efficiency and Stability', Destination Renewables: From Research to Market, L. Aye and W. W. S. Charters (ed.), Australia and New Zealand Solar Energy Society, Melbourne (41st Annual Conference of the Australian and New Zealand Solar Energy Society)
Mathers, N., Thompson, L. and Ghorbani, K. 2003, 'Development of Inflatable Feed for Inflatable Parabolic Dish Antenna', 3rd Australian Space Science Workshop - Abstracts, P. Young (ed.), National Space Soceity of Australia, Australia (3rd Australian Space Science Workshop)
Momin, M., Sinha, A., Kusumo, R., Hogan, P. and Laycock, K. 2003, 'A Systems Methodology to Define Required Mission Capabilities for Helicopter Medical Emergency Operations', Proceedings of the 59th Annual Forum of the American Helicopter Society, B. M. Blosum (ed.), American Helicopter Society International, Phoenix, Arizona (59th Annual Forum of the American Helicopter Society)
Mouritz, A., Mathys, Z. and Gardiner, C. 2003, 'Thermomechanical Modelling the Fire Properties of Fibre-Polymer Composites', Proceedings of the 14th International Conference on Composite Materials, H. T. Hahn and M. Martin (ed.), Society of Manufacturing Engineers, Dearborn, Michigan (14th International Conference on Composite Materials)
Netherwood, G. 2003, 'Online Education in Quality', Proceedings of the Qualcon 2003 Conference on Reinvigorating Quality Improvement, A. Pilli (ed.), Australian Organisation for Quality, Melbourne (Qualcon 2003 Conference Reinvigorating Quality and Improvement)
Netherwood, G., Kakos, G. and Long, A. 2003, 'Six Sigma Training', Proceedings of the Qualcon 2003 Conference on Reinvigorating Quality Improvement, A. Pilli (ed.), Australian Organisation for Quality, Melbourne (Qualcon 2003 Conference on Reinvigorating Quality and Improvement)
Nguyen, M., Elder, D., Bayandor, J., Thomson, R. and Scott, M. 2003, 'A Review of Explicit Finite Element Software for Composite Impact Analysis', Proceedings of the 14th International Conference on Composite Materials, T. Hahn (ed.), Society of Manufacturing Engineers, Dearborn, Michigan (14th International Conference on Composite Materials)
Nguyen, T., Sinha, A. and Stafford, A. 2003, 'Conceptual Design Methodology for a Multi-mission Reconfigurable Unmanned Aerial Vehicle', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Nguyen, T., Sinha, A., Young, K., Laycock, K. and Hogan, P. 2003, 'An Intelligent System for the Pre-mission Analysis of Helicopter Medical Emergency Services', Proceedings of the 29th European Rotorcraft Forum, B. Gmelin and W. Splettstoesser (ed.), Deutsche Gesellschaft fur Luft- und Raumfahrt, Bonn (29th European Rotorcraft Forum)
Peebles, C. and Bil, C. 2003, 'Utilising Message-passing and Parallel Algorithms for Numerical Aircraft Design Optimisation', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Phuong, G., Abanteriba, S., Haley, P. and Guillerot, P. 2003, 'Centrifugal Compressor Volute Design Software', Proceedings of the 4th ASME/JSME Joint Conference on Fluid Engineering, C. Clark (ed.), ASME, New York (Fourth ASME/JSME Joint Conference on Fluids Engineering)
Rudov-Clark, S., Lomov, S., Bannister, M., Mouritz, A. and Verpoest, I. 2003, 'Geometric and Mechanical Modelling of 3D Woven Composites', Proceedings of the 14th International Conference on Composite Materials, H. T. Hahn and M. Martin (ed.), Society of Manufacturing Engineers, Dearborn, M1ichigan (14th International Conference on Composite Materials)
Rudov-Clark, S., Mouritz, A. and Bannister, M. 2003, 'Tensile Fatigue Properties of 3D Woven Composites', Proceedings of 14th International Conference on Composite Materials, H. T. Hahn and M. Martin (ed.), Society of Manufacturing Engineers, Dearborn, Michigan (14th International Conference on Composite Materials)
Sinclair, J. and Abanteriba, S. 2003, 'Performance Comparison of Commercial CFD Codes Steady State Internal Flow Simulation of Gasoline Direct Injection', Proceedings of the 4th ASME/JSME Joint Conference on Fluids Engineering, C. Clark (ed.), American Society of Mechanical Engineers, New York (Fourth ASME/JSME Joint Conference on Fluids Engineering)
Sinha, A., Kusumo, R., Hogan, P. and Laycock, K. 2003, 'Automation of Pre-mission Success Evaluation Module for Medical Emergency Helicoper Operations', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Sinha, A., Kusumo, R. and Supramaniam, N. 2003, 'System Framework for Mission Payload Design of Unmanned Combat Aerial Vehicle', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Stephens, A., Watkins, S. and Dixon, C. 2003, 'Aerodynamic Testing of a Vented Disc Brake', SAE Technical Paper 2003 World Congress and Exhibition, J. Williams (ed.), Society of Automotive Engineers, Detroit (SAE 2003 World Congress and Exhibition)
Stewart, N., Leach, G. and John, S. 2003, 'Improved CSG rendering using overlap graph subtraction sequences', Proceedings of the First International Conference on Computer Graphics and Interactive Techniques in Australasia and South East Asia, D. Arnold and G. Wyvill (ed.), ACM Press, New York (First International Conference on Computer Graphics and Interactive Techniques in Australasia and South East Asia (GRAPHITE2003))
Subic, A., Abu-Hijleh, B. and Tu, J. 2003, 'Effect of Rotor's Angular Speed and Aspect Ratio on Entropy Generation in a Rotor-casing Assembly', Proceedings of the 3rd International Conference on Computational Fluid Dynamics in the Minerals and Processing Industries, M. P. Schwarz (ed.), CSIRO, Melbourne (Third International Conference on Computational Fluid Dynamics in the Minerals and Processing Industries)
Subic, A. 2003, 'Internationalising Sports Technology Research and Education in the Asia-Pacific Region', Proceedigs of the Internatioal Symposium on Sports Engineering, S. Ujihashi (ed.), Japan Sports Engineering Association, Hiroshima (International Symposium on Sports Engineering)
Subic, A., Abu-Hijleh, B., Tu, J., Li, H. and Illie, K. 2003, 'CFD Comparison of Clearance Flow in a Rotor-casing Assembly Using Asymmetric vs Symmetric Lobe Rotors', Proceedings of the IMECE'03 2003 ASME International Mechanical Engineering Congress, F. White (ed.), American Society of Mechanical Engineering, Washington, DC (IMECE'03 2003 ASME International Mechanical Engineering Congress)
Tadich, L., Thomas, J. and Sinha, A. 2003, 'Feasibility Studies on Helicopter Technology', Proceedings of the Fourth Australian Pacific Vertiflite Conference on Helicopter Technology, A. K. Sinha (ed.), American Helicopter Society, Melbourne (Fourth Australian Pacific Vertiflite Conference on Helicopter Technology)
Tambunan, B., Mahdavian, M. and Chen, B. 2003, 'Heat Transfer Solidification Models of the Continuous Casting Process', Proceedings of the International Seminar on Aerospace Technology 2003, Sutrisno (ed.), Gadjah Mada University, Yogyakarta, Indonesia (International Seminar on Aerospace Technology 2003)
Tambunan, B., Mahdavian, M. and Chen, B. 2003, 'Development of an Experimental Continuous Casting Rig for Studying Surface Quality of Cast Billet', Proceedings of the 9th International Conference on Manufacturing Excellence 2003, J. Hudson (ed.), CSIRO, Melbourne (Ninth International Conference on Manufacturing Excellence)
Thompson, L., Bil, C., Carstairs, G. and Mathers, N. 2003, 'Teaching Science "Spiders in Space Experiment" on Columbia STS -107', Proceedings of the 14th Annual Conference for Australasian Association for Engineering Education and 9th Australasian Women in Engineering Forum, A. Brown (ed.), Australasian Association for Engineering Education, Melbourne (The 14th Annual Conference for Australasian Association for Engineering Education and 9th Australasian Women in Engineering Forum)
Trivailo, P., Sgarioto, D. and Subic, A. 2003, 'Sensitivity Analysis of Tennis Serve Kinematics in Relation to Court Alterations', Sports Dynamics: Discovery and Application, A. Subic et al. (ed.), RMIT University Press, Melbourne (International Congress on Sports Dynamics (ICSD-2003))
Trivailo, P., Kao, T., Blanksby, C. and Plotnikova, L. 2003, 'Stress and Deflection Reduction for Robotic Arms undergoing Continuous Reconfiguration Using Decentralised Control', Proceedings of the 54th International Astronautical Federation Congress, P. Bainum (ed.), American Institute of Aeronautics and Astronautics, Reston, VA (54th International Astronautical Federation Congress)
Trivailo, P., Blanksby, C., Sgarioto, D., Williams, P. and Smart, R. 2003, 'Defence Applications for Cable Systems Deployed from Aerial and Naval Platforms', Proceedings of the Land Warfare Conference 2003, V. Puri et al. (ed.), DSTO Australia, Adelaide (Land Warfare Conference 2003)
Trivailo, P., Plotnikova, L., Kao, T. and Blanksby, C. 2003, 'Optimal, Decentralised Stress Control in Modular, Reconfigurable Space Structures', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Tu, J. and Yeoh, G. 2003, 'Development of a Numerical Model for Subcooled Boiling Flow', Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, P. Schwarz (ed.), CSIRO, Melbourne (Third International Conference of CFD in the Minerals and Process industries)
Tu, J., Yeoh, G., Morsi, Y. and Yang, W. 2003, 'Numerical and Experimental Study of Particle Rebounding Flow Characteristics in a Gas-Particulate Flow over Curved Bodies', Proceedings of FEDSM'03 4th ASME/JSME Joint Fluids Engineering Conference, D. E. Stock (ed.), ASME, Honolulu (4th ASME/JSME Joint Fluids Engineering Conference)
Vino, G., Watkins, S. and Mousley, P. 2003, 'The Passenger Vehicle Wake under the Influence of Upstream Turbulence', SAE Special Publication 2003 World Congress and Exhibition, J. Williams (ed.), Society of Automotive Engineers, Detroit (SAE 2003 World Congress and Exhibition)
Watmuff, J. 2003, 'Effects of Weak Free Stream Nonuniformity on Boundary Layer Transition', Proceedings of the 4th ASME-JSME Joint Fluids Engineering Conference, A. Ogut et al. (ed.), American Society of Mechanical Engineers, Honolulu (Fourth ASME-JSME Joint Fluids Engineering Conference)
Williams, P., Blanksby, C. and Trivailo, P. 2003, 'Optimal Control of Flexible Tethers', Proceedings of the 54th International Astronautical Federation Congress, A. Misra (ed.), American Institute of Aeronautics and Astronautics, Reston, VA (54th International Astronautical Federation Congress)
Williams, P., Blanksby, C. and Trivailo, P. 2003, 'Optimisation of Tether Assisted Sample Return from the International Space Station', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Yap, J., Scott, M., Hackenberg, D. and Rolfes, R. 2003, 'Composite Stiffened Panel Impact Damage Simulations and Parametric Studies', Proceedings of the 10th Australian International Aerospace Congress, D. J. Mee (ed.), Institution of Engineers Australia, Canberra (Tenth Australian International Aerospace Congress)
Yeoh, G. and Tu, J. 2003, 'A Mechanistic Model for Predicting Subcooled Boiling Flow', Proceedings of FEDSM'03 4th ASME/JSME Joint Fluids Engineering Conference, D. E. Stock (ed.), ASME, Honolulu (4th ASME/JSME Joint Fluids Engineering Conference)

Download 382.54 Kb.

Share with your friends:
  1   2   3   4   5   6   7   8




The database is protected by copyright ©ininet.org 2020
send message

    Main page