Uni-Directional Digital Cable Products Supporting m-card m-udcp device Acceptance Test Plan tp-atp-m-udcp-i05-20080304 issued notice This Test Plan document is furnished by Cable Television Laboratories, Inc

1 Host Acceptance Test Procedures 8

1.1 Purpose and Scope 8

1.2 Test Definitions 8

Table 1.2-1 - Test Definitions 8

Table 1.2-2 - FDC Noise Power bandwidths 9

Table 1.2-3 - Analyzer Configuration 9

1.3 Equipment List 11

Table 1.3-1 - Equipment List 11

1.4 Vendor Documentation Package 12

2 Security 13

2.1 Conditional Access 13

2.1.1 Host Conditional Access Resource Test [M-Mode] 13

2.2 Copy Protection 18

2.2.1 Analog Program Copy Protection 18

Table 2.2-1 – Macrovision Modes 18

2.2.2 Digital Program Copy Protection 23

2.3 Certificate Storage and Management 32

2.3.1 Certificate CA Structure 32

3 Physical Layer Characteristics 34

3.1 FAT Channel 34

3.1.1 Host FAT Channel Functional Test 34

3.1.2 FAT Channel HRC/IRC Tuning Test 37

3.1.3 Host FAT LO Leakage Test 38

Table 3.1-1 – Video Carriers 39

3.1.4 FAT Channel Micro-reflection Test 40

3.1.5 FAT Channel Phase Noise Tolerance 42

3.1.6 FAT Channel AM Hum Modulation Immunity 43

3.1.7 Host Spurious Emissions Test 44

3.1.8 Host Maximum Individual Carrier Test 46

3.1.9 Host RF Input Return Loss Test 49

3.1.10 Adjacent Channel Characteristics Test 51

3.1.11 Combined Distortions Test 55

Table 3-1-2 – Combined Distrotion Test Equipment List 57

3.2 Forward Data Channel (FDC) 66

3.2.1 Host FDC Channel Parametric Test 66

3.2.2 FDC tuning range and bit rate test 67

3.2.3 FDC Adjacent Channel BER Test 70

4 CableCard InterfACE 75

4.1 Host Device & Initialization 75

4.1.1 Host-CableCARD Interface Visual Test 75

4.1.2 Host Device Capability Discovery 76

4.1.3 Host OOB Signaling Test 78

4.1.4 Host Initialization Test 79

Table 4.1-1 – Pin Signal Monitor 80

4.1.5 OOB Host Control Test 84

4.1.6 Host System Time Test 86

4.1.7 In band Host Control and Host CableCARD Firmware Upgrade Test (Homing) 89

4.1.8 Initialization Error Detection and Handling 99

4.1.9 Host Transport Stream Data Rate Test 103

4.2 Host Channel Change 105

4.2.1 Host Channel Change Functional Test 105

4.3 Man Machine Interface (MMI) Support 107

4.3.1 Host Data Channel Multi-Layer Test 107

4.3.2 Host Application Information and MMI Test 110

113

4.4 Extended Channel Support 114

4.4.1 Host Extended Channel Link Layer Test 114

4.4.2 SCTE 65 Service Information Delivered OOB Profiles 1-6 115

5 MULTI-MEDIA INTERFACES 122

5.1 NTSC Analog and Vertical Blanking Interval (VBI) 122

5.1.1 Host VBI Pass-Through Test 122

5.1.2 Host Analog Closed Caption Test 123

6 Video 124

6.1 Digital Video 124

6.1.1 Reserved 124

6.1.2 Digital Video Decoding 124

Table 6.1-1 - Digital Video Compression Test Table (Sarnoff SD Formats) 126

Table 6.1-2 - Digital Video Compression Test Table (Sarnoff HD Formats) 128

Table 6.1-3 - Compression Format Constraints 129

Table 6.1-4 – MPEG-2 Coded Values 129

6.1.3 In-Band Service/System Information 132

Table 6.1-5 - In-Band PSIP Test Digital Service List 133

Table 6.1-6 – Descriptor List 134

6.1.4 Closed Captioning 137

Table 6.1-7 – Closed Caption Procedure 139

6.1.5 Emergency Alert Service (EAS) 144

6.1.6 OOB EAS Tests 146

6.1.7 Content Advisory 150

6.2 Video Performance Specifications 156

6.2.1 Uncompressed Digital Video Interface & Signal Formats 156

Table 6.2-1 - Required Video Formats and their Relation to CEA Definitions 156

Table 6.2-2 - Summary of Required Video Formats per EIA/CEA 861 specifications 156

7 Audio 163

7.1 Audio Performance Specifications 163

7.1.1 Audio Parametric/ Digital Audio FunctionalityTest 163

8 Host Device Powering States 164

8.1.1 Host Power Supply Test 164

8.1.2 Host Standby Mode Test 167

Table 8.1-1 – Pin Signals 167

9 Mechanical 169

9.1.1 Host-CableCARD Temperature/Average Power Test 169

10 Multi-FAT Receiver Test 170

11 Equipment configuration 178

12 M-UDCP Interoperability Tests 179

12.1 Scientific Atlanta 179

12.1.1 Scientific Atlanta CORE Interoperability Tests 179

12.1.2 Minimum FAT Power Interoperability test 185

12.1.3 Maximum FAT Power Interoperability test 187

12.1.4 Lower Frequency Interoperability Test 189

12.1.5 Upper Frequency Interoperability Test 190

12.1.6 One Way Legacy OOB Messaging 190

12.1.7 In Band Host Control Firmware Upgrade Test 193

12.2 Motorola 194

12.2.1 Motorola CORE Interoperability Tests 194

12.2.2 Minimum FAT Power Interoperability test 200

12.2.3 Maximum FAT Power Interoperability test 202

12.2.4 Lower Frequency Interoperability Test 204

12.2.5 Upper Frequency Interoperability Test 204

12.2.6 One Way Legacy OOB Messaging 204

12.3 Harmonic 207

12.3.1 Harmonic CORE Interoperability Tests 207

12.3.2 Minimum FAT Power Interoperability test 212

12.3.3 Maximum FAT Power Interoperability test 214

12.3.4 Lower Frequency Interoperability Test 217

12.3.5 Upper Frequency Interoperability Test 217

12.3.6 One Way Legacy OOB Messaging 217

Annex A M-UDCP Vendor Proof of Compliance Submitted Documentation Recommendations 220

Table 1.2-1 - Test Definitions 8

Table 1.2-2 - FDC Noise Power bandwidths 9

Table 1.2-3 - Analyzer Configuration 9

Table 1.3-1 - Equipment List 11

Table 2.2-1 – Macrovision Modes 18

Table 3.1-1 – Video Carriers 39

Table 3-1-2 – Combined Distrotion Test Equipment List 57

Table 4.1-1 – Pin Signal Monitor 80

Table 6.1-1 - Digital Video Compression Test Table (Sarnoff SD Formats) 126

Table 6.1-2 - Digital Video Compression Test Table (Sarnoff HD Formats) 128

Table 6.1-3 - Compression Format Constraints 129

Table 6.1-4 – MPEG-2 Coded Values 129

Table 6.1-5 - In-Band PSIP Test Digital Service List 133

Table 6.1-6 – Descriptor List 134

Table 6.1-7 – Closed Caption Procedure 139

Table 6.2-1 - Required Video Formats and their Relation to CEA Definitions 156

Table 6.2-2 - Summary of Required Video Formats per EIA/CEA 861 specifications 156

Table 8.1-1 – Pin Signals 167

Figure 3.1-1 – Maximum Individual Carrirer Set-up 46

Figure 3.1-2 – Combined Distrotion Set-up 56

Figure 3.1-3 – Combined Distrtion Test Switch 58

Figure 3.1-4 – FDC Adjacent Channel BER Test Set-up 71

Figure 4.1-1 – CableCARD Device Input Timing 79

Figure 4.1-2 – M-CARD Power-On Timing 82

Figure 4.1-3 – M-CARD Power-Down Timing 82

Figure 4.1-4 – M-CARD Power-On and Reset Timing 83

Figure 6.1-1 – DUT w/ RF Tuner Set-up 138

Figure 8.1-1 – DUT Power Suply Test Set-up 165

Figure 8.1-2 – Analyzer Capture 168

Figure 11.1-1 - HPNX PRO test configuration for Host ATP 178

Directory: wp-content -> uploads
uploads -> 587 Return function, r i(X) r i(0) r i(1) r i(2) r i(3) 1 0 2 4 6 Thermal Station, I 2 0 1 5 6 3 0 3 5 6 10
uploads -> The Case Against the nypd’s Quota-Driven ‘Broken Windows’ Policing What Is It?
uploads -> For want of a nail
uploads -> Police Militarization
uploads -> Stop Militarizing Law Enforcement Act of 2014
uploads -> 2017 afoCo Landmark Scholarship Program
uploads -> Instructions for the Preparation of Camera-Ready Contributions to the Conference Proceedings
uploads -> Medical Radiography Program
uploads -> Ihbb asian Championships 2014 middle school bowl Round 4 First Quarter
uploads -> Ihbb european Championships 2014 Bowl Round 4 First Quarter