Question: What should be first attempted if compliant fuel is unavailable?
Download 36.5 Kb.
|
| Question:
Where should bunker samples be taken from? (Ref S.I 20 20.7) Number of correct alternatives: 1 New fuels need a pre bunkering Coq meaning it has already been tested and found compliant so there is no need for bunker samples Directly from the fuel tank All bunker samples will be supplied by the bunker barge On the receiving vessel's inlet bunker manifold Question: Who is required to cross check and verify that all information required is specified in the BDN? (Ref S.I 20 20.19) Number of correct alternatives: 1 Master and Chief Engineer Responsibility of the bunker barge Ship to send and wait for Operations to verify compliance Only attending bunkering superintendent Question: How much HSFO ROB can remain in a tank that is ready to bunker compliant fuel oil? (Ref PowerPoint) Number of correct alternatives: 1 Up to 5 m³ if chemical cleaning agents will be used 0.5 m³ 0.3% of the quantity to be loaded Tanks need to be fully clean (zero ROB) Question: What is the unit of measurement that sulphur emissions are tested by? (Ref S.I 20b 2.1) Number of correct alternatives: 1 % m/m (percentage mass by mass) SO2 (ppm) / CO2 (% v/v) (SO2/CO2 ratio method) Nox ppm SO2 (ppm) Question: When Should you enter a record of revision in the SIP? Number of correct alternatives: 1 If PSC come and inspect the SIP and tells you to change a part of it. When a change / regulation to the plan is implemented Upon Masters orders. Never once the SIP is in force no changes are to be made. Download 36.5 Kb. Share with your friends:
|