Highly technical and experienced in E&I, Electronics and Control System Engineering. With over 13 years industrial experience including position of Lead Engineer with Rockwell Automation

• 
  Kepserver, RSLink, OPC,ODBC, Hyperterminal, Term-f & SQL, Windows Server, VMware, Virtual Machine, XP, W7
  
• 
  Ladder Logic, FBD, Structured Text, Sequential Flow Chart, Web Based Management devices, SBC’s, Network Config
  

• 
  E&I and Systems Commissioning of MUX BOPs, ShutDown, Ballast Systems, SCADA systems and DrillFloor Packages
  

• 
  PLC Programming Upgrades and Design of various systems (Ladder, FBD, Structured Text, Sequential Flow Chart)
  
• 
  SCADA/ HMI Programming Upgrades and Design- Set up and Config, good knowledge of visual basics
  
• 
  Control system Sensors and actuator incorporation from S/W through to H/W and configuration
  
• 
  Cable Schedules, I/O Configurations, project documentation reviews
  

• 
  Interpret: Client P&IDs; Hydraulic/Pneumatic Schematics, Excellent computer skills- Computer/ network config
  
• 
  System Configuration and firmware updates, Knowledge of industrial communications protocols- Profibus Ethernet etc
  

• 
  Rockwell (Silvertech)/ NOV Shaffer Deepwater MUX BOP Control System Specialist- 5^th and 6^th Generation
  

• 
  NOV Amphion Cyber Control System, NOV VICIS Drilling Packages, NOV Cyberbase Drill Floor Equipment
  
• 
  ICSTriplexSilvertech / Tristar Emergency Shut Down, NOV Shaffer Surface BOP, Mud Pit Data Acquisition
  
• 
  NOV Automated Pipe Racking System, Ventilation Shut Down, Schneider Jacking System, various rig systems
  
• 
  Automated Weapons Handling Systems (Babcock-DST) , Building Management Systems (HVAC)- Google ,
  
• 
  Crossrail- SCADA (Siemens) , Huisman Pipe Lay Systems, PPS Pipe Lay Systems
  

• 
  HNC Electrical & Electronic (Tees-side University), NVQ Level 3 Electrical Maintenance, (Offshore)
  
• 
  HNC Mechatronics (6 units), (Dundee College), NVQ Level 2 Electrical Installation, TTE
  
• 
  NC Operations & Maintenance, (R & C COVE),
  

Dates of Employment

• 
  Short term contract - Siemens - review of project documentation, I/O configuration/allocation , cables schedules
  

• 
  Extensive software programming/debugging - PLC, Drive code, Visual Basics, re-design of various parts of electrical system
  
• 
  Electrical and Control commissioning of Automated Weapons Handling System- Drives and associated electrical equipment
  
• 
  Emerson Drives, GE Fanuc PLC's, Cimplicty HMI, PLC controls and Drive Software
  

• 
  Graphics Lead on Distributed Network SCADA build from scratch , for Google Datacentre BMS System. (Short Term contract)
  
• 
  Training of personell and setup/build of SCADA- Factory Talk View (FT View) Network Distributed , RS logix5000
  

• 
  Subsea Systems- PLC and SCADA programming upgrades and troubleshooting
  
• 
  PLC’s- Modicon- Schneider- Unity Pro (Structured Text, SFC), Siemens S7. HMI- Wonderware- Intouch & Citrect- Schneider
  

• 
  Overseeing installation and commissioning of Electronic systems during rig build in Singapore.
  
• 
  Top-side NOV Amphion Cyber , (PRS, TDX1250, ST-160 IRN etc) , NOV Surface BOP, Schneider Jacking System, etc
  

• 
  Office based (Houston)- PLC and HMI Programming of variousl Systems, Project Documentation & FAT's with Client
  
• 
  As Lead Engineer (SHI Korea)- Focal point for all 5^th & 6^th Gen MUX BOP Control Systems, liaising with USA office and client,
  
• 
  Directions given to NOV E&I personnel and Rockwell Engineers. Purchasing and tracking of materials, on-site training given
  

• 
  Houston Office- software modification of HMI/PLC code (Cimplicty/GE Fanuc) for BOP's, also FAT's& document updates.
  
• 
  Computer/ Ethernet network config and troubleshooting. Fibre/Ethernet/profibus
  
• 
  Site- Extensive on-site mods of software/hardware . Red lines of H/W and commissioning of systems
  
• 
  Troubleshooting and set up of various electronic devices, I/O, electrical devices, servers and PLC/SCADA issues
  

• 
  Noble Danny Atkins Ventilation Shutdown System (ESD), Commissioning of all hardware and software
  

• 
  Elec/inst commissioning, UPS commissioning, controls commissioning of BOPs and VSS systems
  
• 
  Modification of Ventilation Shut Down System HMI and PLC to suit client specifications.
  

• 
  Installation, pre-comm, repair and testing of E&I equipment.- CompEx, loop cal, Ex, F+G, Various I/O
  

• 
  * Preventative and corrective maintenance routines * Power generation, manual as well as auto sync
  
• 
  * EX equipment, HVAC systems, AC/DC motors, HV/LV switchgear, UPS, Generators, Power distribution