Table 25SET IP configuration

92
Device Settings on the IP Phone E with SIP Firmware
Table 28
VLAN Filter configuration
VLAN Filter :
14
Disable PC Port configuration. Press the Select key to turnoff the
PC port on the IP Phone EA check mark in the Disable PC Port box indicates the PC port is disabled.
Disable PC Port can be used in an environment where administrators do not want users accessing the data network through the built-in
PC port.
Table 29
Disable PC Port configuration
Disable PC Port :
15
Configure the Data VLAN.
It is possible to Enable or disable separate VLAN for anything other than voice and signaling.
Table 30
Data VLAN Configuration in Device Settings menu
Data VLAN :
No
No
4095
16
Configure PC-Port Untag-All, which configures PC-Port VLAN Tag
Stripping. Check the checkbox by pressing the Select key in the
Navigation key cluster to enable this item.
If the checkbox is not checked, tag stripping is disabled and the packet is sent to the PC port unmodified. If the checkbox is checked, tag stripping is enabled and the q header is removed
(assuming one exists) from the packet before it is forwarded through the PC port.
If Data VLAN is enabled instep, PC-Port Untag All is enabled and the checkbox is checked by default. In this case, the outgoing tag is stripped. Override the default by pressing the Select key to remove the checkmark.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Configure the device settings
93
If Data VLAN is disabled, PC-Port Untag All is disabled and the checkbox is not checked by default. In this case, the ingress tag is not stripped. The default can be overridden by pressing the Select
key, which places a checkmark in the box.

Download 1.47 Mb.

Share with your friends: