Sip firmware Release 1 for ip phone 1140e administration

Download 1.47 Mb.

View original pdf

Page	57/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 53 54 55 56 57 58 59 60 ... 76

NN43113-300 02.05 1140E Adm

ApplyReset Context-sensitive soft key
Navigation key cluster

Key
Action
Down
Opens list or moves highlight down list.
Up
Moves highlight up list.
Right
Selects the next item or moves the cursor right in an edit item.
Left
Selects the previous item or deletes a character in the edit field.
Select key (center of cluster)
Selects the highlighted item in the combo box or ends edit mode.
In Edit mode, the first field of the item is highlighted. Press the
Apply&Reset Context-sensitive soft key to save settings in the
Device Settings menu after all the necessary changes are made.
This action resets the IP Phone 1140E.
Press the Return Context-sensitive soft key to exit the Device
Settings menu without saving any changes.
6
Navigate to the first item in the Device Settings menu to configure
EAP.
Table 23
EAP configuration
Enable x (EAP):
Device ID:
Password:
A check mark appears in the checkbox if the item is active.
7
If the Enable x (EAP) check box is checked, fill in the Device
ID and the Password.
8
Configure DHCP in the Device Settings menu.
Use the right arrow in the Navigation key cluster to highlight the
DHCP box. Press the Select key to access a list of DHCP mode choices:
•
No
•
Partial
•
Full
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Configure the device settings
91
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press the Select key to select No.
Table 24
DHCP configuration
DHCP :
No
No
Partial
Full
9
Select SET IP in the Device Settings menu to configure the IP
address.

Download 1.47 Mb.

Share with your friends:

1 ... 53 54 55 56 57 58 59 60 ... 76