Developing a Hazard Identification Process within an easa part camo organisation



Download 0.72 Mb.
View original pdf
Page1/7
Date17.12.2020
Size0.72 Mb.
#55192
  1   2   3   4   5   6   7
(7) Developing a Hazard Identification Process within an EASA Part CAMO Organisation LinkedIn
(7) Developing a Hazard Identification Process within an EASA Part CAMO Organisation LinkedIn


14/10/2020
(7) Developing a Hazard Identification Process within an EASA Part CAMO Organisation | LinkedIn https://www.linkedin.com/pulse/developing-hazard-identification-process-within-easa-part-joanna/
1/5
Developing a Hazard Identification
Process within an EASA Part CAMO
Organisation
Publié le 19 août 2020
Joanna Miroslavova
366 articles
Suivre
Introduction
Our goal is to be in a position to capture all hazards in such away that they can be analyzed and assessed, this is one of if not the most challenging part of the organization process. There is a common tendency to confuse hazards with their consequences or outcomes however whilst hazards are an inevitable part of aviation activities, their manifestation, and possible consequences can be addressed through various mitigation strategies to contain the hazards potential from resulting in unsafe aircraft or aviation equipment operations.
Note 1 - A consequence is an outcome that could be triggered by a hazard. For example, a missed Airworthiness Directive (AD) is a projected consequence in relation to the hazard of ineffective maintenance planning management.
By first defining the hazard clearly, one can then project the proper consequence or outcome.
Senior Training Consultant SofemaOnline and Sofema Aviation Services
Recherche
Essai Premium gratuit 1
mois

Download 0.72 Mb.

Share with your friends:
  1   2   3   4   5   6   7




The database is protected by copyright ©ininet.org 2024
send message

    Main page