Intended Reader
|
Maintenance engineer
|
Product Version
|
HG633 V100R001C21B028
|
Department
|
Terminal Product Line
|
Document Version
|
V1.0
|
HG633 V100R001C21B028
Version Deployment and Upgrade Guide
Drafted by
|
TangJianxue
|
Date
|
2023-6-7
|
Reviewed by
|
ShenMeng
|
Date
|
2023-6-7
|
Approved by
|
Liyouxiang
|
Date
|
2023-6-7
|
Huawei Technologies Co., Ltd.
All rights reserved
Revision Record
Date
|
Revised Version
|
Description
|
Author
|
2023-6-7
|
1.0
|
Init
|
TangJianxue
|
|
|
|
|
Key words: HG633 deployment, upgrade, Multicast Upgrade
Abstract: This document lists three upgrade modes, and provides different schemes for choice. Terminal products are large in quantity and scattered in distribution, thus, it is important that we use Multicast Upgrade in advance for auto grade function, in this way to reduce the labor input and realize the good maintainability of the product.
List of Acronyms and Abbreviations:
HG (W) Home Gateway
NAT Network Address Translation
HTTP Hypertext Transfer Protocol
WLAN Wireless Local Area Network
DSLAM Digital Subscriber Line Access Multiplexer
BAS Board band Access Server
ATM Asynchronous Transfer Mode
For details, refer to related manuals.
Table of Contents
Chapter 1 Overview 1
1.1 Version Descriptions 1
1.2 Application Descriptions 1
1.2.1 Features 1
1.2.2 Version Release Strategy 1
1.2.3 Maintenance Function 1
1.3 Software Version Descriptions 1
1.3.1 Files Loaded 1
Chapter 2 Version Upgrade 3
2.1 Local Upgrade through Web 3
2.1.1 Preparations 3
2.1.2 Procedures 3
2.2 Multicast Upgrade 6
2.2.1 Preparations 6
2.2.2 Procedures: 6
2.3 Notes: 7
Chapter 3 Check Software 8
3.1 Check Software Version 8
Chapter 1 Overview 1.1 Version Descriptions
The HG633 V100R001C21B028 version is released to Talktalk use.
1.2 Application Descriptions 1.2.1 Features
The main features of the HG633 V100R001C21B028 Version Deployment and Upgrade Guide are as follows:
-
类别
|
功能
|
Hardware
| |
Basic functions
| |
Network functions
|
NAT function.
DHCP (Server/Client) function
Route function
Port Forwarding
SNTP function
|
Maintenance
| |
1.2.2 Version Release Strategy
HG633 V100R001C21B028 is a informal version.
Supporting three upgrade modes: Multicast Upgrade, local manual upgrade and local upgrade in the urgent-recover mode.
1.3 Software Version Descriptions 1.3.1 Files Loaded
Document name
文件名称
|
Document description
文件说明
|
HG633v1.15t_main.bin
|
Only contain application, NOT contain bootload and configuration
|
HG633v1.15t_multicast_restore_default_pack.bin
|
The image for Multicast upgrade
|
HG633v1.15t_multicast_restore_default_pack.ini
|
The information file for Multicast upgrade
|
MUT_eng.exe
|
The toolset of Multicast upgrade
|
Chapter 2 Version Upgrade
HG633 V100R001C21B028 supports the following three ways of upgrade:
2.1 Local Upgrade through Web
Set the IP address of the maintenance PC to 192.168.1.1/255.255.255.0 (The default maintenance IP address of Home Gateway is 192.168.1.1/255.255.255.0).Connect the maintenance PC to any network port of the Home Gateway through the network cable. Ensure that you can PING through the maintenance IP address of Home Gateway in the maintenance PC.
Prepare the version file to be upgraded in the local PC,
Ensure the IE or Netscape browser works in a normal state in the maintenance PC..
2.1.2 Procedures
Log in to the system. Enter http://192.168.1.1 in the address bar of the IE or Firefox in the maintenance PC. Enter the correct username and password in the prompted dialog box.(The administrator username is admin, password is XXXXXXXX(see the label at the Back cover)). Use the administrator username and password. Click Login to log in to the system .
Back up the data(If no need goto step (3) directly). Before the backup, select Maintain > Device Management> Back Up or Restore Settings to display the following page (as shown below). Click Back Up to save the current settings.
Upgrade the version. Select Maintain > Device Management> Firmware Upgrade from the navigation list on the left of the page to display the following page (as shown below). Click Browse to select the right version file(HG633v1.15t_main.bin), and then click Upgrade. The system begins to load the version file and the system reboots after finishing the loading. After the reboot, follow the step (1) to log in to the system. Confirm the current version number and settings. If the system cannot reboot normally, use the Multicast Upgrade mode as mentioned in 2.2 Multicast Upgrade
Now, the upgrade completes(If backup configuration data , goto step (4)).
log in the system as step 1), and then select Device Management> Back Up or Restore Settings to display the following page (as shown below). Click Restore Settings to save the settings under the selected directory (The default name of the saved configuration file is downloadconfigfile.conf). Then verify whether the saved settings are correct.).
Share with your friends: |