Bailey Infi90 Interface to the pi system

-priCIU=#Required when-failover=2

Download 0.78 Mb.

View original pdf

Page	35/49
Date	28.09.2022
Size	0.78 Mb.
	#59618

1 ... 31 32 33 34 35 36 37 38 ... 49

PI Interface to the Baily System

REM======================================================================= REM REM I90.bat REM

-priCIU=#
Required when
-failover=2
The -priCIU parameter indicates the primary CIU node/PCU number. This parameter is required when the Interface is running as the Secondary interface in a failover configuration.
If the -failover parameter is 0, the priCIU parameter has no effect.
-ps=C
Optional
The –ps parameter indicates the point source character of the PI points that the Interface services. Each instance of the Interface uses the –ps and –CIU# parameters to identify uniquely its particular list of points to service.
The default value is N.
-tsync=#
Optional
A positive value for the -tsync parameter synchronizes the Bailey time with the interface computer time. A value of 0 indicates no time synchronization.
The default value is 0.
-wdogidx=#
Optional
When two copies of the Interface run in a failover configuration, they communicate with each other via a CIU index. The wdogidx parameter specifies this watchdog CIU index.
The default value is 1. If the -failover parameter is 0, the
wdogidx parameter has no effect.
Sample i90.bat File

Bailey Infi90 Interface to the PI System

47
The following is an example of the contents of a startup command file for the Interface:
REM=======================================================================
REM
REM
I90.bat
REM
REM Sample startup file for the Bailey Infi90 Interface to the
REM PI System
REM
REM=======================================================================
REM
REM OSIsoft strongly recommends using PI ICU to modify startup files.
REM
REM Sample command line
REM
.\i90.exe –ps=N –CIU#=1 –host=XXXXXX:5450 port –baudrate=9600

Download 0.78 Mb.

Share with your friends:

1 ... 31 32 33 34 35 36 37 38 ... 49