Important: If PBXs are remote and communicate via Internet, forward the ports 443 TCP and 1194 UDP on the router of the Master PBX to the IP address of the Master. Go to Settings > PBX > WMS Network.
Master configuration
PBX mode: Master
MTU: the size of the largest protocol data unit that the can be passed on VPN (MTU = maximum transmission unit)
Login: set up the Login (must be the same on Master and Slaves)
Password: set up the Password (must be the same on Master and Slaves)
Slave configuration
PBX mode: Slave
Master PBX IP: specify the WAN IP of the Master PBX (or the *.wildixin.com domain name)
NOTE: Go to Users > PBXs to view the PBXs in your WMS network; on this page you can find the URL addresses by which you can reach each PBX in your WMS Network.
NOTE: Enabling WMS Network will delete users and groups from the Slave. In case you enable WMS Network on a Slave PBX that had been previously in use, users and groups will be deleted from the Slave. To restore the existing users, follow these steps: Export the CSV file of users of the Slave
Appendix 2: User preferences It is possible to add users manually or import them from MySQL / MSSQL, LDAP / AD, Google, Office 365, Exchange Server, CSV file.